显示标签为“Pegasystems”的博文。显示所有博文
显示标签为“Pegasystems”的博文。显示所有博文

2014年4月21日星期一

Le meilleur matériel de formation examen Pegasystems PEGACMBB

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Pegasystems PEGACMBB. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test Pegasystems PEGACMBB à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.

La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Pegasystems PEGACMBB.

Code d'Examen: PEGACMBB
Nom d'Examen: Pegasystems (PRPC Certified Methodology Black Belt Exam )
Questions et réponses: 62 Q&As

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Pegasystems PEGACMBB est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Beaucoup de gens trouvent difficile à passer le test Pegasystems PEGACMBB, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Pegasystems PEGACMBB n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.

PEGACMBB Démo gratuit à télécharger: http://www.pass4test.fr/PEGACMBB.html

NO.1 In the SmartBPM methodology, when should project enablement training (role based training) begin?
(Choose one)
A. Project Initiation
B. Elaboration
C. Inception
D. None of the above
Answer: A

Pegasystems   PEGACMBB examen   PEGACMBB

NO.2 The following action occurs during all phases of the SmartBPM Methodology: (Choose one)
A. Quality checks
B. Governance
C. Directly Capturing Objectives
D. All of the above
Answer: D

Pegasystems examen   certification PEGACMBB   PEGACMBB   PEGACMBB

NO.3 The program roadmap presents the big picture for solution development. This roadmap is divided into
_____ which are divided into _____ which are made up of _____. (Choose one)
A. Use cases, slivers, projects
B. Projects, use cases, slivers
C. Use cases, projects, slivers
D. Projects, slivers, use cases
Answer: D

Pegasystems   PEGACMBB   PEGACMBB examen   certification PEGACMBB

NO.4 It is a best practice to create an inventory of existing objectives, requirements, use cases, and other
project artifacts because: (Choose Two)
A. Reusing artifacts saves time and effort
B. These artifacts can be used to enter information into the Application Profiler
C. These artifacts can be used to extract information from the Project Management Framework
D. These artifacts are required to create a new application
Answer: A,B

Pegasystems   PEGACMBB   PEGACMBB

NO.5 The following processes/tools are used in the Inception phase EXCEPT: (Choose one)
A. Project Plan Template
B. Methodology Alignment Workshop
C. Project Management Framework
D. Test Management Framework
Answer: D

certification Pegasystems   certification PEGACMBB   certification PEGACMBB   PEGACMBB   PEGACMBB

NO.6 When these artifacts are combined they result in a checklist that shows the business has received the
expected value from this application: (Choose two)
A. Objectives
B. Requirements
C. Use cases
D. Project scenarios
Answer: A,B

Pegasystems   PEGACMBB   PEGACMBB   certification PEGACMBB   PEGACMBB examen   certification PEGACMBB

NO.7 All of the following are benefits realized from the SmartBPM Methodology EXCEPT: (Choose one)
A. Short release cycles ensure maximum value is obtained along the way
B. Strict project management planning and measurement using tollgate milestones
C. Users provide higher quality requirements for subsequent releases after first-hand experience
D. Planning for multiple releases establishes a framework that ensures value gain in the future
Answer: B

Pegasystems   PEGACMBB   PEGACMBB

NO.8 Use case rules can reference or be referenced by which other rules? (Choose 3)
A. Flows
B. Activities
C. Requirements
D. Validation rules
E. Properties
Answer: A,B,C

Pegasystems   PEGACMBB examen   certification PEGACMBB   PEGACMBB

NO.9 The full scope of the Directly Capturing Objectives (DCO) session is defined as running the Application
Profiler during the Inception phase. True or False
A. True
B. False
Answer: B

Pegasystems examen   PEGACMBB   certification PEGACMBB

NO.10 From a flow rule you can see links to what elements of the flow? (Choose four)
A. Various shapes in the flow
B. Requirements
C. Starting models
D. Flow-wide Local Actions
E. Entire flows
Answer: A,B,D,E

certification Pegasystems   PEGACMBB   certification PEGACMBB   PEGACMBB

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.

L'avènement de la certification Pegasystems pratique d'examen PEGACSA_v6.2 questions et réponses

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.

Peut-être vous voyez les guides d'études similaires pour le test Pegasystems PEGACSA_v6.2, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Pegasystems PEGACSA_v6.2 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Le test Pegasystems PEGACSA_v6.2 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test Pegasystems PEGACSA_v6.2. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Pegasystems PEGACSA_v6.2, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Pegasystems PEGACSA_v6.2. Peut-être d'obtenir le Certificat Pegasystems PEGACSA_v6.2 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Code d'Examen: PEGACSA_v6.2
Nom d'Examen: Pegasystems (Certified System Architect Exam (CSA) v6.2 Exam)
Questions et réponses: 341 Q&As

La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Pegasystems PEGACSA_v6.2.

Finalement, la Q&A Pegasystems PEGACSA_v6.2 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Pegasystems PEGACSA_v6.2 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Pegasystems, vous aurez un meilleur salaire et une plus grande space à se développer.

PEGACSA_v6.2 Démo gratuit à télécharger: http://www.pass4test.fr/PEGACSA_v6.2.html

NO.1 Once you create a simu-lation for a connector, the simu-lation remains in effect
__________________________. (Choose One)
A. until disabled by using the Connector Simulation tool
B. until the simulation activity is deleted
C. permanently on the system; it can never be disabled
D. until the first call to the connector is completed
Answer: A

Pegasystems   PEGACSA_v6.2 examen   certification PEGACSA_v6.2   PEGACSA_v6.2   PEGACSA_v6.2

NO.2 Which of the following tools can be used to accelerate the creation of rules used to
support PRPC
connectors and services? (Choose Two)
A. Application Profile Wizard
B. Connector and Metadata Accelerator
C. Application Accelerator
D. Service Accelerator
Answer: B,D

Pegasystems examen   PEGACSA_v6.2 examen   PEGACSA_v6.2   certification PEGACSA_v6.2   certification PEGACSA_v6.2

NO.3 Which statements describe the use of methods in an activity? (Choose Two)
A. Methods are atomic operations performed in activity steps
B. Methods are the same as Java methods
C. You can create activity methods for use in your activities
D. Methods can be applied to clipboard pages
Answer: A,D

Pegasystems   PEGACSA_v6.2 examen   PEGACSA_v6.2 examen

NO.4 Which connector type can be used to connect an Assignment to another shape?
(Choose One)
A. Flow Action
B. Always
C. When
D. Status
Answer: A

certification Pegasystems   PEGACSA_v6.2   certification PEGACSA_v6.2

NO.5 Which statement is true about Work Users utilizing the Clipboard tool? (Choose One)
A. They may use it to change their portal layout
B. They may use it to change their password
C. They have no access to the Clipboard tool from the standard User portal
D. They may use it to update work object properties
Answer: C

certification Pegasystems   PEGACSA_v6.2   PEGACSA_v6.2 examen   PEGACSA_v6.2

NO.6 Which of the following can an activity do that a data transform cannot? (Choose One)
A. Set the value of a property on a clipboard page
B. Apply a data transform
C. Route a work item
D. Remove a clipboard page
Answer: C

Pegasystems   PEGACSA_v6.2 examen   PEGACSA_v6.2   PEGACSA_v6.2 examen

NO.7 The Connector and Metadata Accelerator can simplify the creation of a connector by
________________________ to create the necessary rules. (Choose Two)
A. parsing a WSDL
B. parsing a provided Java source file
C. introspecting class metadata
D. creating an SQL query
Answer: A,C

Pegasystems examen   certification PEGACSA_v6.2   PEGACSA_v6.2   PEGACSA_v6.2   PEGACSA_v6.2   PEGACSA_v6.2

NO.8 What is the transition in an Activity used for? (Choose One)
A. To repeat a step several times, or until a condition is met
B. To change the harness display
C. To jump to a previous step in the Activity
D. To specify conditional processing which is evaluated after the method in the step is
executed
Answer: D

Pegasystems   PEGACSA_v6.2   PEGACSA_v6.2   PEGACSA_v6.2   PEGACSA_v6.2

NO.9 Which two are characteristics of the primary page of an Activity? (Choose Two)
A. It is a clipboard page named Primary
B. It is the default location of properties referenced with a dot and no preceding page name
C. It is the same as the parameter page
D. It is a clipboard page of the Applies To class of the activity or one of its ancestors
Answer: B,D

Pegasystems examen   certification PEGACSA_v6.2   PEGACSA_v6.2   certification PEGACSA_v6.2   PEGACSA_v6.2

NO.10 A PRPC component that defines and implements an interface between an external
application acting as
a client and a Process Commander system acting as a server is called a
______________________?
(Choose One)
A. Connector
B. Activity
C. Service
D. Assignment
Answer: C

certification Pegasystems   PEGACSA_v6.2   PEGACSA_v6.2 examen   PEGACSA_v6.2 examen

NO.11 Which of the following is the best method for requesting data from an SQL database?
(Choose One)
A. SQL connector
B. SQL listener
C. Service package
D. External database table class mapping
Answer: D

Pegasystems   PEGACSA_v6.2   PEGACSA_v6.2   certification PEGACSA_v6.2

NO.12 Service Level rules include which of the following time intervals? (Choose Two)
A. Milestone
B. Requirement
C. Goal
D. Deadline
Answer: C,D

Pegasystems   PEGACSA_v6.2 examen   PEGACSA_v6.2 examen   PEGACSA_v6.2   PEGACSA_v6.2 examen   PEGACSA_v6.2

NO.13 An operator enters data into fields on a work item form. When does PRPC write the
data to the
database? (Choose One)
A. When the user leaves each field
B. When the user submits the form, but before any validation occurs
C. When the user completes the last assignment in the process
D. When the user submits the form, and after any validation occurs
Answer: D

certification Pegasystems   PEGACSA_v6.2   PEGACSA_v6.2

NO.14 Why should a business process be run at least once before measuring it with
Performance Analyzer
(PAL)? (Choose One)
A. So PAL can establish a baseline
B. So Rules Assembly occurs and does not adversely affect the outcome
C. So PAL can start up properly
D. So the developer can capture Rules Assembly times
Answer: B

Pegasystems   certification PEGACSA_v6.2   PEGACSA_v6.2 examen

NO.15 What is the primary purpose of the My Alerts tool? (Choose One)
A. To review and resolve interactions that exceed predefined threshold settings
B. To insert JavaScript alerts into HTML property rules
C. To establish PRPC threshold settings in the prconfig.xml file
D. To create personal alerts warning the System Architect of rule conflicts
Answer: A

certification Pegasystems   certification PEGACSA_v6.2   PEGACSA_v6.2   PEGACSA_v6.2 examen   PEGACSA_v6.2

NO.16 On which flow shape would you reference a service rule? (Choose One)
A. Decision
B. Integrator
C. Assignment
D. None of the above shapes
Answer: D

Pegasystems examen   PEGACSA_v6.2 examen   PEGACSA_v6.2   PEGACSA_v6.2 examen   PEGACSA_v6.2 examen   PEGACSA_v6.2

NO.17 (True or False) When you optimize a property for reporting, any data saved in the
BLOB up to that
point is not available for reports.
A. True
B. False
Answer: B

Pegasystems   certification PEGACSA_v6.2   PEGACSA_v6.2   PEGACSA_v6.2 examen   PEGACSA_v6.2

NO.18 Which of the following tools are most commonly used to evaluate performance during
development of
a PRPC application? (Choose Three)
A. Preflight
B. PAL
C. Rules Inspector
D. My Alerts
E. Clipboard
Answer: A,B,D

certification Pegasystems   PEGACSA_v6.2   PEGACSA_v6.2

NO.19 Which two statements are true about Activity step pages? (Choose Two)
A. The step page always corresponds to the class named in the Applies To key part of the
Activity
B. Step pages are automatically removed when an Activity ends
C. The step page sets the default page context for the duration of the step's execution
D. Named step pages are not required for each step of an Activity
Answer: C,D

Pegasystems examen   certification PEGACSA_v6.2   certification PEGACSA_v6.2   certification PEGACSA_v6.2   PEGACSA_v6.2 examen

NO.20 Which Activity method is used to view the contents of a step page in XML format?
(Choose One)
A. Page-New
B. Show-Page
C. Property-Set
D. Step pages cannot be viewed as XML
Answer: B

Pegasystems examen   certification PEGACSA_v6.2   PEGACSA_v6.2   PEGACSA_v6.2 examen

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Pegasystems PEGACSA_v6.2 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Pegasystems PEGACSA_v6.2 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Pegasystems PEGACSA_v6.2 plus facilement avec la Q&A de Pass4Test.

2013年12月5日星期四

Pass4Test offre une formation sur Pegasystems PEGACSA-v6.2 matériaux examen

Avec la version plus nouvelle de Q&A Pegasystems PEGACSA-v6.2, réussir le test Pegasystems PEGACSA-v6.2 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Le test certification Pegasystems PEGACSA-v6.2 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Pegasystems PEGACSA-v6.2 puisse augmenter la compétition dans ce marché.

On peut voir que beaucoup de candidats ratent le test Pegasystems PEGACSA-v6.2 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Pegasystems PEGACSA-v6.2 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Pegasystems PEGACSA-v6.2, Pass4Test peut offrir les Q&As des autres test Certification IT.

Code d'Examen: PEGACSA-v6.2
Nom d'Examen: Pegasystems (Certified System Architect Exam (CSA) v6.2 Exam)
Questions et réponses: 213 Q&As

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

PEGACSA-v6.2 Démo gratuit à télécharger: http://www.pass4test.fr/PEGACSA-v6.2.html

NO.1 What is the transition in an Activity used for? (Choose One)
A. To repeat a step several times, or until a condition is met
B. To change the harness display
C. To jump to a previous step in the Activity
D. To specify conditional processing which is evaluated after the method in the step is executed
Answer: D

certification Pegasystems   PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2

NO.2 Which two statements are true about Activity step pages? (Choose Two)
A. The step page always corresponds to the class named in the Applies To key part of the Activity
B. Step pages are automatically removed when an Activity ends
C. The step page sets the default page context for the duration of the step's execution
D. Named step pages are not required for each step of an Activity
Answer: C,D

Pegasystems   PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2

NO.3 Which Activity method is used to view the contents of a step page in XML format? (Choose One)
A. Page-New
B. Show-Page
C. Property-Set
D. Step pages cannot be viewed as XML
Answer: B

Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2 examen   PEGACSA-v6.2   PEGACSA-v6.2

NO.4 Which of the following tools can be used to accelerate the creation of rules used to support PRPC
connectors and services? (Choose Two)
A. Application Profile Wizard
B. Connector and Metadata Accelerator
C. Application Accelerator
D. Service Accelerator
Answer: B,D

Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2 examen

NO.5 On which flow shape would you reference a service rule? (Choose One)
A. Decision
B. Integrator
C. Assignment
D. None of the above shapes
Answer: D

certification Pegasystems   PEGACSA-v6.2 examen   PEGACSA-v6.2   PEGACSA-v6.2 examen   certification PEGACSA-v6.2

NO.6 An operator enters data into fields on a work item form. When does PRPC write the data to the
database? (Choose One)
A. When the user leaves each field
B. When the user submits the form, but before any validation occurs
C. When the user completes the last assignment in the process
D. When the user submits the form, and after any validation occurs
Answer: D

Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2 examen   PEGACSA-v6.2

NO.7 Which statement is true about Work Users utilizing the Clipboard tool? (Choose One)
A. They may use it to change their portal layout
B. They may use it to change their password
C. They have no access to the Clipboard tool from the standard User portal
D. They may use it to update work object properties
Answer: C

Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2

NO.8 Which connector type can be used to connect an Assignment to another shape? (Choose One)
A. Flow Action
B. Always
C. When
D. Status
Answer: A

certification Pegasystems   PEGACSA-v6.2 examen   PEGACSA-v6.2 examen   PEGACSA-v6.2

NO.9 Service Level rules include which of the following time intervals? (Choose Two)
A. Milestone
B. Requirement
C. Goal
D. Deadline
Answer: C,D

Pegasystems   PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2

NO.10 (True or False) When you optimize a property for reporting, any data saved in the BLOB up to that
point is not available for reports.
A. True
B. False
Answer: B

Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2   certification PEGACSA-v6.2

NO.11 Which statements describe the use of methods in an activity? (Choose Two)
A. Methods are atomic operations performed in activity steps
B. Methods are the same as Java methods
C. You can create activity methods for use in your activities
D. Methods can be applied to clipboard pages
Answer: A,D

certification Pegasystems   certification PEGACSA-v6.2   PEGACSA-v6.2 examen   certification PEGACSA-v6.2

NO.12 Which of the following can an activity do that a data transform cannot? (Choose One)
A. Set the value of a property on a clipboard page
B. Apply a data transform
C. Route a work item
D. Remove a clipboard page
Answer: C

Pegasystems examen   PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2 examen

NO.13 Once you create a simu-lation for a connector, the simu-lation remains in effect
__________________________. (Choose One)
A. until disabled by using the Connector Simulation tool
B. until the simulation activity is deleted
C. permanently on the system; it can never be disabled
D. until the first call to the connector is completed
Answer: A

Pegasystems   certification PEGACSA-v6.2   certification PEGACSA-v6.2

NO.14 Which two are characteristics of the primary page of an Activity? (Choose Two)
A. It is a clipboard page named Primary
B. It is the default location of properties referenced with a dot and no preceding page name
C. It is the same as the parameter page
D. It is a clipboard page of the Applies To class of the activity or one of its ancestors
Answer: B,D

Pegasystems examen   PEGACSA-v6.2   PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2

NO.15 Which of the following is the best method for requesting data from an SQL database? (Choose One)
A. SQL connector
B. SQL listener
C. Service package
D. External database table class mapping
Answer: D

Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2

NO.16 A PRPC component that defines and implements an interface between an external application acting as
a client and a Process Commander system acting as a server is called a ______________________?
(Choose One)
A. Connector
B. Activity
C. Service
D. Assignment
Answer: C

Pegasystems   PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2

NO.17 Why should a business process be run at least once before measuring it with Performance Analyzer
(PAL)? (Choose One)
A. So PAL can establish a baseline
B. So Rules Assembly occurs and does not adversely affect the outcome
C. So PAL can start up properly
D. So the developer can capture Rules Assembly times
Answer: B

certification Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2

NO.18 Which of the following tools are most commonly used to evaluate performance during development of
a PRPC application? (Choose Three)
A. Preflight
B. PAL
C. Rules Inspector
D. My Alerts
E. Clipboard
Answer: A,B,D

Pegasystems   PEGACSA-v6.2 examen   certification PEGACSA-v6.2   PEGACSA-v6.2

NO.19 What is the primary purpose of the My Alerts tool? (Choose One)
A. To review and resolve interactions that exceed predefined threshold settings
B. To insert JavaScript alerts into HTML property rules
C. To establish PRPC threshold settings in the prconfig.xml file
D. To create personal alerts warning the System Architect of rule conflicts
Answer: A

Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2

NO.20 The Connector and Metadata Accelerator can simplify the creation of a connector by
________________________ to create the necessary rules. (Choose Two)
A. parsing a WSDL
B. parsing a provided Java source file
C. introspecting class metadata
D. creating an SQL query
Answer: A,C

certification Pegasystems   PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2   certification PEGACSA-v6.2

Vous pouvez télécharger tout d'abord une partie de Q&A Certification Pegasystems PEGACSA-v6.2 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Pegasystems PEGACSA-v6.2. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

2013年11月22日星期五

Les meilleures Pegasystems PEGACCA examen pratique questions et réponses

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Pegasystems PEGACCA est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Pegasystems PEGACCA.

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Pegasystems PEGACCA. Ajoutez la Q&A au panier.

Pour réussir le test Pegasystems PEGACCA demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Pegasystems PEGACCA. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Pegasystems PEGACCA avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Code d'Examen: PEGACCA
Nom d'Examen: Pegasystems (PRPC Certified CPM Architect)
Questions et réponses: 50 Q&As

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Pegasystems PEGACCA. Ce ne sera pas un problème à réussir le test Pegasystems PEGACCA si vous préparez le test avec notre guide d'étude.

Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Pegasystems PEGACCA sans aucune doute si vous choisissez le Pass4Test.

PEGACCA Démo gratuit à télécharger: http://www.pass4test.fr/PEGACCA.html

NO.1 Which of the following would you configure in order to specify the subset of properties that
can be included within dialog scripts. (Choose One)
A. Interaction driver rule
B. Decision table rule within the dialog class
C. Data source rule
D. Map value rule within the dialog class
Answer: C

Pegasystems   certification PEGACCA   certification PEGACCA

NO.2 True or False, To maintain backward compatibility with future CPM releases, you should not
override the workflows, flow actions, or sections used within CPM service items/processes.
A. True
B. False
Answer: B

Pegasystems   PEGACCA   PEGACCA

NO.3 Which one of the following CANNOT be configured using the CPM Configuration Tools Wizard?
(Choose One)
A. Dialog scripts
B. Suggested processes
C. Coaching tips
D. Association of knowledge content to a user screen
Answer: B

Pegasystems   PEGACCA   certification PEGACCA   PEGACCA   certification PEGACCA

NO.4 Which of the following is NOT a best practice in CPM dialog management ________? (Choose
One)
A. Dialog rules should be contained in a separate RuleSet from other configuration such as flows
and flow actions
B. Dialog scripts should contain what to say; not what to do
C. Dialog scripts should include references to customer data
D. CSRs should be encouraged to configure personal dialog scripts
Answer: D

Pegasystems examen   certification PEGACCA   PEGACCA   PEGACCA

NO.5 Which of the following steps is necessary in order to configure CPM portal search for an
external data source (such as account data from a legacy system)? (Choose One)
A. Enable PRPC work indexing on your system
B. Specify a search retrieval activity on the CPM data source rule
C. Modify the list view rule used for portal search to include your data source
Answer: B

Pegasystems   certification PEGACCA   PEGACCA   PEGACCA   certification PEGACCA

NO.6 Which one of the following is not a valid result type when using the CPM portal search
function? (Choose One)
A. Knowledge content rules
B. Service item work objects/cases
C. External data sources such as accounts or contacts
D. Workbaskets (work queues)
Answer: D

Pegasystems   PEGACCA   PEGACCA   PEGACCA examen
NO. 9 True or False, Flow-action-based dialog requires that a dialog rule be referenced from the
assignment and flow action within the workflow diagram.
A. True
B. False
Answer: B

Pegasystems   PEGACCA   PEGACCA
10. Which of the following is NOT a benefit of suggesting processes to a user during a customer
interaction? (Choose One)
A. Reduced user training time
B. Improved user productivity
C. Improved customer satisfaction
D. None. All of the above are benefits
Answer: D

Pegasystems   certification PEGACCA   PEGACCA examen   certification PEGACCA   certification PEGACCA

NO.7 The text that displays to the user as the task name within a CPM Interaction Driver category
list is
__________. (Choose One)
A. The HeaderTitle field value that is defined within the service item class
B. The short description of the starting workflow for the service item
C. The short description of the Intent Task rule
D. All of the above
Answer: C

certification Pegasystems   certification PEGACCA   PEGACCA

NO.8 When designing UI components, which of the following is NOT a best practice? (Choose One)
A. Know the standard screen resolution for end user desktops
B. Place required data entry so that the user can tab to complete them
C. Within process screens, use conditional displays
D. Use bold text and many colors to make important fields stand out
E. Avoid non-standard acronyms and abbreviations in captions
Answer: D

Pegasystems   PEGACCA   certification PEGACCA

Avec l'aide du Pass4Test, vous allez passer le test de Certification Pegasystems PEGACCA plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Pegasystems PEGACCA, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.

Le matériel de formation de l'examen de meilleur Pegasystems PEGACLSA_6.2V2

Vous n'avez besoin que de faire les exercices à propos du test Pegasystems PEGACLSA_6.2V2 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

Avec l'aide du Pass4Test, vous allez passer le test de Certification Pegasystems PEGACLSA_6.2V2 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Pegasystems PEGACLSA_6.2V2, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.

Le test Pegasystems PEGACLSA_6.2V2 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Pegasystems PEGACLSA_6.2V2 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Pegasystems PEGACLSA_6.2V2.

Code d'Examen: PEGACLSA_6.2V2
Nom d'Examen: Pegasystems (Certified Lead System Architect (CLSA) 6.2V2)
Questions et réponses: 149 Q&As

Le programme de formation Pegasystems PEGACLSA_6.2V2 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

En quelques années, le test de certification de Pegasystems PEGACLSA_6.2V2 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Pegasystems PEGACLSA_6.2V2? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification PEGACLSA_6.2V2. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification PEGACLSA_6.2V2, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Pegasystems PEGACLSA_6.2V2 est une bonne examination. Mais c'est difficile à passer le test Pegasystems PEGACLSA_6.2V2. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

On peut voir que beaucoup de candidats ratent le test Pegasystems PEGACLSA_6.2V2 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Pegasystems PEGACLSA_6.2V2 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Pegasystems PEGACLSA_6.2V2, Pass4Test peut offrir les Q&As des autres test Certification IT.

PEGACLSA_6.2V2 Démo gratuit à télécharger: http://www.pass4test.fr/PEGACLSA_6.2V2.html

NO.1 An application administrator has been sent a number of complaints that after nightly server
restarts the PRPC application is slow in the early morning. Which of the following actions can be
used to mitigate this issue? (Choose One)
A. Enable Assembly Avoidance
B. Restart System Pulse
C. Configure and execute Static Assembler
D. Increase the size of the Rule Cache
Answer: C

Pegasystems examen   certification PEGACLSA_6.2V2   PEGACLSA_6.2V2   certification PEGACLSA_6.2V2   PEGACLSA_6.2V2

NO.2 When is it appropriate to use a spin-off? (Choose One)
A. When you wish to run calculations in a separate thread from the current process
B. When you wish to make a long-running SOAP service call asynchronously
C. When you wish to start another flow execution while continuing down the current process path
D. When you wish to call multiple connector rules concurrently
Answer: C

certification Pegasystems   PEGACLSA_6.2V2   PEGACLSA_6.2V2 examen   PEGACLSA_6.2V2 examen   PEGACLSA_6.2V2

NO.3 You have been asked to build a human resources application that facilitates the work required
to
support new hires. For each new hire, multiple tasks must be done, such as "Acquire Computer"
and "Setup Payroll". You are having trouble deciding if each of these tasks should be represented
as separate assignments in the same case, or separate sub-cases. Which of the following
requirements will help you decide on the approach? (Choose Two)
A. It must be possible for "Acquire Computer" and "Setup Payroll" to be assigned to different
operators at the same time
B. It must be possible for the completion of one task to be independent from the other
C. It must be possible to edit fields for "Acquire Computer" and "Setup Payroll" at the same time
D. It must be possible to configure security differently; those who can open "Acquire Computer"
must not be able to open "Setup Payroll"
E. "Acquire Computer" and "Setup Payroll" require the capability to be reopened independently
Answer: C,E

certification Pegasystems   PEGACLSA_6.2V2 examen   PEGACLSA_6.2V2 examen   PEGACLSA_6.2V2

NO.4 A rule is shown in the Final Conflicts report after doing an upgrade. Which of the following
describe what could be done to resolve the conflict? (Choose Two)
A. The rule could be marked Final
B. The rule could be deleted or Withdrawn so that the standard version of the rule is executed
C. Do a SaveAs on the conflicting rule to a new name and update references to this new rule
D. The rule could be copied into the production RuleSet
E. The corresponding RuleSet could be locked
F. The rule could be copied into a more specific class
Answer: B,C

certification Pegasystems   PEGACLSA_6.2V2   certification PEGACLSA_6.2V2   PEGACLSA_6.2V2

NO.5 A work type MyCo-FW-PurchaseApp-Work-Request has a PageList property .LineItems of class
MyCo-FW-PurchaseApp-Data-Item.
Another work type, MyCo-FW-PurchaseApp-Work-Order has a PageList property .ItemsForVendor
of class MyCo-FW-PurchaseApp-Data-Item.
An item has a calculation .TotalPrice = .Quantity * .UnitPrice.
The application is experiencing behavior where the TotalPrice is calculating correctly for Requests
but not for Orders. Which of the following is the most likely explanation for this issue? (Choose
One)
A. The expression is likely defined as a context-sensitive expression ("only when the top level
page is of the applies to class")
B. The expression is likely defined as backward chaining
C. The expression is likely defined as a context-free expression ("regardless of any page it is
contained in")
D. The expression is likely defined as forward chaining
Answer: A

Pegasystems   PEGACLSA_6.2V2   PEGACLSA_6.2V2   certification PEGACLSA_6.2V2

La Q&A Pegasystems PEGACLSA_6.2V2 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Pegasystems PEGACLSA_6.2V2.

2013年10月26日星期六

Le matériel de formation de l'examen de meilleur Pegasystems PEGACMBB

Le Certificat de Pegasystems PEGACMBB signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Pegasystems PEGACMBB, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test PEGACMBB sans aucun éffort, en même temps, le test de Pegasystems PEGACMBB demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Pegasystems PEGACMBB et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

Si vous vous inscriez le test Pegasystems PEGACMBB, vous devez choisir une bonne Q&A. Le test Pegasystems PEGACMBB est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

Choisir le Pass4Test peut vous aider à réussir 100% le test Pegasystems PEGACMBB qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Le test Certificat Pegasystems PEGACMBB est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Pegasystems PEGACMBB. Vous allez prendre toutes essences du test Pegasystems PEGACMBB dans une courte terme.

On peut voir que beaucoup de candidats ratent le test Pegasystems PEGACMBB quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Pegasystems PEGACMBB est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Pegasystems PEGACMBB, Pass4Test peut offrir les Q&As des autres test Certification IT.

Code d'Examen: PEGACMBB
Nom d'Examen: Pegasystems (PRPC Certified Methodology Black Belt Exam )
Questions et réponses: 62 Q&As

PEGACMBB Démo gratuit à télécharger: http://www.pass4test.fr/PEGACMBB.html

NO.1 From a flow rule you can see links to what elements of the flow? (Choose four)
A. Various shapes in the flow
B. Requirements
C. Starting models
D. Flow-wide Local Actions
E. Entire flows
Answer: A,B,D,E

certification Pegasystems   PEGACMBB   PEGACMBB   PEGACMBB

NO.2 The full scope of the Directly Capturing Objectives (DCO) session is defined as running the Application
Profiler during the Inception phase. True or False
A. True
B. False
Answer: B

certification Pegasystems   PEGACMBB   PEGACMBB   certification PEGACMBB

NO.3 The following processes/tools are used in the Inception phase EXCEPT: (Choose one)
A. Project Plan Template
B. Methodology Alignment Workshop
C. Project Management Framework
D. Test Management Framework
Answer: D

certification Pegasystems   certification PEGACMBB   PEGACMBB

NO.4 In the SmartBPM methodology, when should project enablement training (role based training) begin?
(Choose one)
A. Project Initiation
B. Elaboration
C. Inception
D. None of the above
Answer: A

Pegasystems   certification PEGACMBB   certification PEGACMBB   PEGACMBB examen   PEGACMBB

NO.5 All of the following are benefits realized from the SmartBPM Methodology EXCEPT: (Choose one)
A. Short release cycles ensure maximum value is obtained along the way
B. Strict project management planning and measurement using tollgate milestones
C. Users provide higher quality requirements for subsequent releases after first-hand experience
D. Planning for multiple releases establishes a framework that ensures value gain in the future
Answer: B

Pegasystems   PEGACMBB examen   PEGACMBB   PEGACMBB

NO.6 The following action occurs during all phases of the SmartBPM Methodology: (Choose one)
A. Quality checks
B. Governance
C. Directly Capturing Objectives
D. All of the above
Answer: D

Pegasystems examen   certification PEGACMBB   PEGACMBB   PEGACMBB   PEGACMBB examen

NO.7 The program roadmap presents the big picture for solution development. This roadmap is divided into
_____ which are divided into _____ which are made up of _____. (Choose one)
A. Use cases, slivers, projects
B. Projects, use cases, slivers
C. Use cases, projects, slivers
D. Projects, slivers, use cases
Answer: D

Pegasystems   certification PEGACMBB   PEGACMBB examen   certification PEGACMBB   PEGACMBB

NO.8 Use case rules can reference or be referenced by which other rules? (Choose 3)
A. Flows
B. Activities
C. Requirements
D. Validation rules
E. Properties
Answer: A,B,C

Pegasystems examen   PEGACMBB   PEGACMBB   PEGACMBB

NO.9 When these artifacts are combined they result in a checklist that shows the business has received the
expected value from this application: (Choose two)
A. Objectives
B. Requirements
C. Use cases
D. Project scenarios
Answer: A,B

Pegasystems   PEGACMBB examen   PEGACMBB   PEGACMBB

NO.10 It is a best practice to create an inventory of existing objectives, requirements, use cases, and other
project artifacts because: (Choose Two)
A. Reusing artifacts saves time and effort
B. These artifacts can be used to enter information into the Application Profiler
C. These artifacts can be used to extract information from the Project Management Framework
D. These artifacts are required to create a new application
Answer: A,B

Pegasystems   PEGACMBB examen   PEGACMBB

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Pegasystems PEGACMBB. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de PEGACMBB, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

2013年9月25日星期三

Meilleur Pegasystems PEGACSA-v6.2 test formation guide

Le test simulation Pegasystems PEGACSA-v6.2 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Pegasystems PEGACSA-v6.2 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

Le test Pegasystems PEGACSA-v6.2 est l'un très improtant dans tous les tests de Certification Pegasystems, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Choisissez le Pass4Test, choisissez le succès de test Pegasystems PEGACSA-v6.2. Bonne chance à vous.

Si vous faites toujours la lutte contre le test Pegasystems PEGACSA-v6.2, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Pegasystems PEGACSA-v6.2. Si vous avez déjà décidé à s'améliorer via Pegasystems PEGACSA-v6.2, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Obtenez la Q&A de test Pegasystems PEGACSA-v6.2 de Pass4Test plus tôt, vous pouvez réussir le test Certification Pegasystems PEGACSA-v6.2 plus tôt.

Code d'Examen: PEGACSA-v6.2
Nom d'Examen: Pegasystems (Certified System Architect Exam (CSA) v6.2 Exam)
Questions et réponses: 213 Q&As

PEGACSA-v6.2 Démo gratuit à télécharger: http://www.pass4test.fr/PEGACSA-v6.2.html

NO.1 An operator enters data into fields on a work item form. When does PRPC write the data to the
database? (Choose One)
A. When the user leaves each field
B. When the user submits the form, but before any validation occurs
C. When the user completes the last assignment in the process
D. When the user submits the form, and after any validation occurs
Answer: D

Pegasystems   PEGACSA-v6.2 examen   certification PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2 examen

NO.2 Which two statements are true about Activity step pages? (Choose Two)
A. The step page always corresponds to the class named in the Applies To key part of the Activity
B. Step pages are automatically removed when an Activity ends
C. The step page sets the default page context for the duration of the step's execution
D. Named step pages are not required for each step of an Activity
Answer: C,D

Pegasystems examen   PEGACSA-v6.2   certification PEGACSA-v6.2   certification PEGACSA-v6.2

NO.3 Once you create a simu-lation for a connector, the simu-lation remains in effect
__________________________. (Choose One)
A. until disabled by using the Connector Simulation tool
B. until the simulation activity is deleted
C. permanently on the system; it can never be disabled
D. until the first call to the connector is completed
Answer: A

Pegasystems   PEGACSA-v6.2 examen   PEGACSA-v6.2   PEGACSA-v6.2 examen   certification PEGACSA-v6.2

NO.4 Which of the following tools can be used to accelerate the creation of rules used to support PRPC
connectors and services? (Choose Two)
A. Application Profile Wizard
B. Connector and Metadata Accelerator
C. Application Accelerator
D. Service Accelerator
Answer: B,D

Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2

NO.5 A PRPC component that defines and implements an interface between an external application acting as
a client and a Process Commander system acting as a server is called a ______________________?
(Choose One)
A. Connector
B. Activity
C. Service
D. Assignment
Answer: C

Pegasystems   PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2

NO.6 Which statements describe the use of methods in an activity? (Choose Two)
A. Methods are atomic operations performed in activity steps
B. Methods are the same as Java methods
C. You can create activity methods for use in your activities
D. Methods can be applied to clipboard pages
Answer: A,D

certification Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2 examen

NO.7 Which Activity method is used to view the contents of a step page in XML format? (Choose One)
A. Page-New
B. Show-Page
C. Property-Set
D. Step pages cannot be viewed as XML
Answer: B

Pegasystems   certification PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2 examen   PEGACSA-v6.2 examen

NO.8 Which two are characteristics of the primary page of an Activity? (Choose Two)
A. It is a clipboard page named Primary
B. It is the default location of properties referenced with a dot and no preceding page name
C. It is the same as the parameter page
D. It is a clipboard page of the Applies To class of the activity or one of its ancestors
Answer: B,D

certification Pegasystems   certification PEGACSA-v6.2   certification PEGACSA-v6.2   certification PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2 examen

NO.9 What is the transition in an Activity used for? (Choose One)
A. To repeat a step several times, or until a condition is met
B. To change the harness display
C. To jump to a previous step in the Activity
D. To specify conditional processing which is evaluated after the method in the step is executed
Answer: D

Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2 examen

NO.10 (True or False) When you optimize a property for reporting, any data saved in the BLOB up to that
point is not available for reports.
A. True
B. False
Answer: B

Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2 examen   certification PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2

NO.11 Which connector type can be used to connect an Assignment to another shape? (Choose One)
A. Flow Action
B. Always
C. When
D. Status
Answer: A

Pegasystems   certification PEGACSA-v6.2   certification PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2

NO.12 Which of the following is the best method for requesting data from an SQL database? (Choose One)
A. SQL connector
B. SQL listener
C. Service package
D. External database table class mapping
Answer: D

Pegasystems examen   PEGACSA-v6.2   PEGACSA-v6.2 examen

NO.13 What is the primary purpose of the My Alerts tool? (Choose One)
A. To review and resolve interactions that exceed predefined threshold settings
B. To insert JavaScript alerts into HTML property rules
C. To establish PRPC threshold settings in the prconfig.xml file
D. To create personal alerts warning the System Architect of rule conflicts
Answer: A

certification Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2

NO.14 On which flow shape would you reference a service rule? (Choose One)
A. Decision
B. Integrator
C. Assignment
D. None of the above shapes
Answer: D

Pegasystems   PEGACSA-v6.2 examen   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2

NO.15 Which of the following tools are most commonly used to evaluate performance during development of
a PRPC application? (Choose Three)
A. Preflight
B. PAL
C. Rules Inspector
D. My Alerts
E. Clipboard
Answer: A,B,D

Pegasystems examen   PEGACSA-v6.2 examen   PEGACSA-v6.2   certification PEGACSA-v6.2   certification PEGACSA-v6.2

NO.16 The Connector and Metadata Accelerator can simplify the creation of a connector by
________________________ to create the necessary rules. (Choose Two)
A. parsing a WSDL
B. parsing a provided Java source file
C. introspecting class metadata
D. creating an SQL query
Answer: A,C

certification Pegasystems   PEGACSA-v6.2 examen   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2

NO.17 Why should a business process be run at least once before measuring it with Performance Analyzer
(PAL)? (Choose One)
A. So PAL can establish a baseline
B. So Rules Assembly occurs and does not adversely affect the outcome
C. So PAL can start up properly
D. So the developer can capture Rules Assembly times
Answer: B

Pegasystems   PEGACSA-v6.2 examen   PEGACSA-v6.2

NO.18 Which of the following can an activity do that a data transform cannot? (Choose One)
A. Set the value of a property on a clipboard page
B. Apply a data transform
C. Route a work item
D. Remove a clipboard page
Answer: C

Pegasystems   PEGACSA-v6.2 examen   PEGACSA-v6.2   certification PEGACSA-v6.2   PEGACSA-v6.2

NO.19 Service Level rules include which of the following time intervals? (Choose Two)
A. Milestone
B. Requirement
C. Goal
D. Deadline
Answer: C,D

Pegasystems   PEGACSA-v6.2 examen   PEGACSA-v6.2   PEGACSA-v6.2 examen

NO.20 Which statement is true about Work Users utilizing the Clipboard tool? (Choose One)
A. They may use it to change their portal layout
B. They may use it to change their password
C. They have no access to the Clipboard tool from the standard User portal
D. They may use it to update work object properties
Answer: C

certification Pegasystems   PEGACSA-v6.2   PEGACSA-v6.2   PEGACSA-v6.2 examen   certification PEGACSA-v6.2   PEGACSA-v6.2

La population de la Certification Pegasystems PEGACSA-v6.2 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

2013年7月31日星期三

Le plus récent matériel de formation Pegasystems PEGACSSA

Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Pegasystems après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.


Votre vie changera beaucoup après d'obtenir le Certificat de Pegasystems PEGACSSA. Tout va améliorer, la vie, le boulot, etc. Après tout, Pegasystems PEGACSSA est un test très important dans la série de test Certification Pegasystems. Mais c'est pas facile à réussir le test Pegasystems PEGACSSA.


La Q&A Pegasystems PEGACSSA est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Pegasystems PEGACSSA.


Le test Pegasystems PEGACSSA est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.


Si vous faites toujours la lutte contre le test Pegasystems PEGACSSA, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Pegasystems PEGACSSA. Si vous avez déjà décidé à s'améliorer via Pegasystems PEGACSSA, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.


Code d'Examen: PEGACSSA

Nom d'Examen: Pegasystems (PRPC v5.5 Certified Senior System Architect Exam)

Questions et réponses: 173 Q&As

En quelques années, le test de certification de Pegasystems PEGACSSA faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Pegasystems PEGACSSA? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification PEGACSSA. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification PEGACSSA, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.


PEGACSSA Démo gratuit à télécharger: http://www.pass4test.fr/PEGACSSA.html


NO.1 What purpose and effect does the Obj-Refresh-and-Lock method have? (Choose One)
A. It has no effect if a lock is held and has not expired
B. It will reacquire a lock and will always refresh the contents of the object from the Database
C. If the lock is not held, the method will acquire a lock and always replace the step page contents with
the current values from the database
D. This method has been deprecated as of PRPC 5.3 in support of the Obj-Browse method which handles
refresh and locking automatically
E. This method is highly efficient and will only refresh the object if the content on the clipboard is older
than the current state in the database and will also force lockthe object regardless ofholds the lock
Answer: A

certification Pegasystems   certification PEGACSSA   PEGACSSA   PEGACSSA examen   PEGACSSA   PEGACSSA

NO.2 What does the system pulse do? (Choose Three)
A. It is used by PRPC to synchronize changes to the Data-Agent-Schedule instances whenever a
Rule-Agent-Queue instance is modified
B. It invalidates rule caches on a per node basis using entries in the pr_sys_updatescache table
C. It processes changes to the Lucene indexes that support full text searches
D. It synchronizes the lookup list cache deletions and any rule-file-deletes
E. It is used by PRPC to send out information to PAL on a weekly basis so that performance analysis can
be performed over a period of time
Answer: B,C,D

Pegasystems   PEGACSSA   PEGACSSA examen   certification PEGACSSA

NO.3 PegaRULES is installed on a multi-node system, and a copy of the various caches is stored on each
node. Each of these nodes must be updated with rule changes. Which functionality in PRPC manages the
update process? (Choose One)
A. Node-Pulse
B. Rule Cache
C. System-Update
D. System-Pulse
Answer: D

certification Pegasystems   PEGACSSA   PEGACSSA   PEGACSSA   PEGACSSA

NO.4 Which statements in regards to commits in PRPC are false? (Choose Two)
A. All database updates require that the requestor holds a lock on the object
B. The system performs commits automatically when processing for a submit operation of a flow action
completes, for both connector and local flow actions
C. Commit operations can trigger the execution of Declare-Trigger rules
D. Assuming distributed transaction is not configured and the deferred operation list contains operations
for only one database. When the system commits all deferred operations for the requestor, if any of the
writes fail, they all fail
E. The deferred operations will be committed when you use the write-now option with the obj-save
method because this causes a commit to occur
Answer: A,E

Pegasystems   PEGACSSA examen   certification PEGACSSA   PEGACSSA   PEGACSSA examen

NO.5 When a rule executes what is really executed.? (Choose One)
A. XML which is stored in the BLOB
B. Java code which is compiled from the XML stored in the BLOB
C. A class file which is stored in the BLOB
D. A serialized java object which is stored in the BLOB
Answer: B

Pegasystems   certification PEGACSSA   PEGACSSA

NO.6 A PRPC installation has 3 nodes. An Agent rule has a single agent listed which takes data from an
external system. It would cause contention issues if it ran on more than one node. What is the
recommended way to ensure the agent only runs in one cluster? (Choose One)
A. Delete the Agent schedule on two nodes
B. Disable the Agent schedule on two of the nodes, either from the Agent Schedule rule form or using the
System Management Application
C. Disable the master agent on two nodes
D. In your Agent activity call a decision table to verify host name of the system (application)
Answer: B

Pegasystems   PEGACSSA   PEGACSSA examen

NO.7 Why does PRPC create a Data-Agent-Queue instance when you create a Rule-Agent-Queue instance?
(Choose One)
A. Data-Agent-Queue instances are not locked so they allow you to control the behavior of Agents in a
locked RuleSet at runtime
B. Data-Agent-Queue instances are created by PRPC to support the new Queue For Agent functionality
which was provided since PRPC v5.4
C. Data-Agent-Queue instances are created automatically by PRPC whenever the Queue-For-Agent
method is used in an activity step to queue work for the Agent
D. Data-Agent-Queue instances are data instances which are used by the Queue Manager functionality to
allow for concurrent access to a queued piece of work by agents running on multiple nodes
E. Data-Agent-Queue instances represent the master definition of PRPC agents and have been
deprecated as of PRPC v5.4 in favor of using Rule-Agent-Queue
Answer: A

certification Pegasystems   PEGACSSA examen   PEGACSSA   certification PEGACSSA   PEGACSSA examen   PEGACSSA

NO.8 Which statement is true regarding how locking works with covers? (Choose One)
A. By default, the cover does not get locked when you open a covered object, but this is configurable
B. By default, the cover is locked when you open a covered object, but this is configurable
C. The cover must always be locked when working on the cover or one of its covered work objects
because updates occur on the cover throughout processing of the covered work objects
D. Cover object locking is identical to that of other work objects, in that it is only locked when it is opened
by a requestor
Answer: B

Pegasystems   PEGACSSA examen   PEGACSSA   certification PEGACSSA

NO.9 Which of the following are virtual memory based caches? (Choose Three)
A. Rule Cache
B. Rules Assembly Cache
C. Rule Resolution Cache
D. Lookup List Cache
E. Static Content Cache
F. Dictionary Cache
Answer: A,B,C

certification Pegasystems   PEGACSSA   PEGACSSA

NO.10 What does the rollback method do? (Choose Two)
A. Cancels/Withdraws any pending obj-save and obj-delete methods
B. Rollback is not supported by PRPC when using a WAR deployment. The only way you can do a
rollback is by using the compensating actions method
C. Rollback is a way to rollback an object to a previous state using the History instance for a work object
D. Rolls back the deferred stack of operations for the specified page
Answer: A,D

Pegasystems examen   PEGACSSA   PEGACSSA examen   PEGACSSA examen

NO.11 Select the valid modes an Agent can have since PRPC 5.4? (Choose Three)
A. Normal
B. Legacy
C. Standard
D. Advanced
E. Modes are not required to be selected for Agents in PRPC 5.4
Answer: B,C,D

Pegasystems   PEGACSSA examen   certification PEGACSSA   PEGACSSA examen

NO.12 PRPC can be installed using a WAR or EAR configuration. Which of the following does NOT require an
EAR configuration? (Choose One)
A. JMS message services support need to be provided
B. Support for two-phase commits is required
C. Support for EJB services need to be provided
D. J2EE security is required
E. JSR-94 support is required
Answer: E

Pegasystems   PEGACSSA examen   PEGACSSA

NO.13 What four steps must be taken to unit test a connector within a flow when the target interface/system is
not yet available? (Choose Four)
A. Create a Simulation activity
B. Set the connector to simulate in the Simulation data instance and specify the activity
C. Use Tracer and set a breakpoint
D. Define a Connect Simulation instance
E. Test the flow with simulation enabled
F. Create a new Integrator task
Answer: A,B,D,E

Pegasystems   certification PEGACSSA   certification PEGACSSA   PEGACSSA examen   certification PEGACSSA

NO.14 Which one of the following statements is true regarding the PRPC threading model? (Choose One)
A. PRThreads are similar to Java threads and the types include STANDARD, DEVELOPER, and
OPENPORTAL
B. A PRThread is essentially a namespace which allows a Requestor to have separate clipboard pages
that do not interact with each other
C. Multiple PRThreads can be executed concurrently depending on whether multi-threading is enabled
D. All of the above
Answer: B

certification Pegasystems   PEGACSSA   certification PEGACSSA   certification PEGACSSA

NO.15 The BLOB is stored in the pzPVStream column of a table and contains the data associated with the
instance. Which two statements are false? (Choose Two)
A. Since it is a column in a table in a database, you can extract the BLOB and use it in another system
B. The BLOB contains the same clear text xml you see when clicking the rule data or the View XML option
in the clipboard
C. The PzPVStream
can be eliminated by use of simple tables (those without embedded pages and
page lists)
D. The BLOB enables a single table to store complex data structures that would normally require multiple
tables in a normalized database
Answer: A,B

Pegasystems   certification PEGACSSA   certification PEGACSSA   PEGACSSA examen   PEGACSSA

NO.16 What determines which table a work object is persisted to? (Choose One)
A. The Data-Admin-DB-Table record for the class group the work object belongs to and the access group
the current user belongs to
B. The RuleSet the class belongs, and Data-Admin-DB-Table definitions
C. The Data-Admin-DB-Table record associated to the class group the work object belongs to
D. The RuleSet the class belongs to
Answer: C

certification Pegasystems   certification PEGACSSA   certification PEGACSSA

NO.17 Where can you view the contents of the Rule Instance Cache? (Choose One)
A. Using the SMA you can view the contents of the instance cache which are displayed in the form of an
Excel file
B. Using the Developer Portal you can view the contents of the instance cache which are displayed in the
form of an excel file and is accessed from the tools > instance cache menu
C. By viewing the XML files from the TEMPDIR\PRGenJava\XML directory
D. By viewing the XML files from the pzInsKey column by using JDBC code
Answer: A

Pegasystems   PEGACSSA examen   PEGACSSA   certification PEGACSSA

NO.18 A customer implementation necessitates the usage of Message-driven beans. Which of these
platforms can the solution be deployed on? (Choose Two)
A. JBoss (EAR Deployment)
B. WebLogic (WAR Deployment)
C. WebSphere (EAR Deployment)
D. Tomcat (WAR Deployment)
E. All of the above
Answer: A,C

Pegasystems   certification PEGACSSA   PEGACSSA   PEGACSSA examen

NO.19 Which statement best describes the Rules Assembly Cache? (Choose One)
A. The Rules Assembly Cache is a disk based cache that stores the generated XML and resulting class
files, post compilation since what finally gets executed is XML, not java code
B. The Rules Assembly Cache is a memory based cache that reduces PegaRULES database traffic as it
contains copies of rules recently accessed or recently updated by developers
C. The Rules Assembly Cache is a memory based cache that allows Process Commander to rapidly
identify compiled Java CLASS files that correspond to compiled and assembled rules
D. The Rules Assembly Cache is a memory based cache used by PRPC to feed the Instance Cache as
the Instance Cache is the instance of a given rule for which code has been generated
Answer: C

Pegasystems   PEGACSSA   PEGACSSA   PEGACSSA examen   PEGACSSA examen

NO.20 Which methods of service integration within PRPC requires the configuration of a listener? (Choose
Two)
A. BPEL
B. HTTP
C. JMS
D. MQ
E. dotNet
Answer: C,D

Pegasystems   certification PEGACSSA   PEGACSSA   PEGACSSA

Le Certificat de Pegasystems PEGACSSA peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Pegasystems PEGACSSA, c'est-à-dire avoir une grande fortune. Le Certificat Pegasystems PEGACSSA peut bien tester des connaissances professionnelles IT. La Q&A Pegasystems PEGACSSA plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.