Le test Symantec 250-405 est l'un très improtant dans tous les tests de Certification Symantec, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Symantec ST0-250 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Symantec ST0-250.
Pass4Test est un catalyseur de votre succès de test Symantec 250-405. En visant la Certification de Symantec, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Symantec 250-405, la Q&A Symantec 250-405 est un bon choix pour vous.
Code d'Examen: 250-405
Nom d'Examen: Symantec (Administration of Symantec Management Platform 7.5)
Questions et réponses: 200 Q&As
Code d'Examen: ST0-250
Nom d'Examen: Symantec (Symantec Messaging Gateway 10.5 Technical Assessment)
Questions et réponses: 126 Q&As
Pass4Test est un site à offrir particulièrement la Q&A Symantec 250-405, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Symantec 250-405, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Symantec 250-405 et même se renforcer vos connaissances professionnelles IT.
Pass4Test vous offre un choix meilleur pour faire votre préparation de test Symantec ST0-250 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Symantec ST0-250 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Symantec ST0-250 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.
250-405 est un test de Symantec Certification, donc réussir 250-405 est le premier pas à mettre le pied sur la Certifiction Symantec. Ça peut expliquer certiainement pourquoi le test Symantec 250-405 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test 250-405. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?
ST0-250 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-250.html
NO.1 How does Symantec DLP communicate with Symantec Messaging Gateway (SMG) to indicate
what type of incident (if any) is related to a given message?
A. Symantec DLP uses the ICAP protocol to indicate if a message is clean,or if it violated any defined
policies.
B. Symantec DLP will add information into the message that can be interpreted by SMG and then
send it to SMG via SMTP .
C. Symantec DLP will quarantine messages that violate established policies,blocking it from SMG.
D. Symantec DLP will use TLS to send a notification message to the SMG server for any content
violations.
Answer: B
Symantec examen ST0-250 examen ST0-250 certification ST0-250 certification ST0-250
NO.2 An administrator needs to determine whether a sending MTA is being throttled by Symantec
Messaging Gateway 10.5. Where is this information located?
A. Reputation Summary report
B. IP reputation lookup table
C. SMTP server logs
D. message audit logs
Answer: B
certification Symantec certification ST0-250 ST0-250 certification ST0-250 ST0-250 examen
6. After a configurable period of time, a suspect virus is released from the Suspect Virus
Quarantine. What happens to it next?
A. An alert is sent to the email administrator.
B. The attachment is removed and the original message is delivered to the recipient.
C. It is rescanned.
D. It is moved to quarantine.
Answer: C
Symantec examen ST0-250 examen certification ST0-250
7. What is the current name of the LDAP synchronization technology used within the Symantec
Messaging Gateway?
A. Dynamic Data Cache
B. Directory Data Service
C. Active Directory
D. Domain Controller Interface (DCInterface)
Answer: B
Symantec examen certification ST0-250 certification ST0-250 ST0-250 examen
8. If recipient validation is configured properly, which SMTP response level is given to messages
that fail recipient validation queries at connect time?
A. 3xx - Service unavailable
B. 4xx - Temporary delivery failure
C. 5xx - Permanent delivery failure
D. 6xx - Rejected validation failure
Answer: C
certification Symantec ST0-250 examen certification ST0-250
9. How should an administrator stop inbound mail using the command line interface (CLI)?
A. use mta-control
B. use mta-stop
C. use mail-control
D. use mail-stop
Answer: A
certification Symantec certification ST0-250 ST0-250 examen
10. Which additional Email Reports Data collection must be enabled to track Top Probe Accounts
via reports?
A. Spam and Unwanted Mail
B. Submissions
C. Sender IP connections
D. Invalid Recipients
Answer: D
Symantec ST0-250 ST0-250 examen certification ST0-250 certification ST0-250
11. Which two statistics can the administrator view regarding the custom anti-spam rulesets?
(Select two.)
A. the "top-submitters" of missed spam or false positive detections
B. the "top submitters" of messages that are not valid and did not generate a custom rule
C. how many emails have been submitted for custom antispam rules
D. the effectiveness of the custom antispam rulesets compared to Symantec's rulesets
E. the top senders of messages detected by custon antispam rulesets
Answer: A,C
Symantec certification ST0-250 ST0-250 examen
12. What two actions can allowed end-users do to submit samples to Symantec and have custom
anti-spam rules created? (Select two.)
A. submit a sample to Symantec using the Email Submission Client
B. flag messages in their web-based SMG quarantine page as being spam and submitting the results
C. forward spam samples to abuse@symantec.com with a subject of "MISSED SPAM"
D. move the message into the included "Junk E-mail" folder available in Outlook
E. submit a sample to Symantec using the Email Submission Client available for Lotus Domino
Answer: A,B
certification Symantec ST0-250 certification ST0-250 certification ST0-250 certification ST0-250 ST0-250
13. A company uses multiple control centers. What must be done to ensure legitimate NDRs are
recognized by Bounce Attack Prevention across all scanners?
A. configure the same seed value on each control center
B. configure the same administrator email address across both control centers
C. configure the same seed value on each scanner
D. configure both control centers with the same internal email hosts
Answer: A
certification Symantec ST0-250 examen ST0-250 examen certification ST0-250
14. An organization would like to participate in the Symantec Probe Network without having to
manually create decoy email accounts. The organization wants to make sure that the addresses that
participate in the Symantec Probe Network are currently receiving email. Which directory data
source function should be enabled to help in this situation?
A. recipient validation
B. address resolution
C. SMTP authentication
D. LDAP routing
Answer: A
certification Symantec ST0-250 ST0-250 examen ST0-250 examen certification ST0-250
15. What is required before attempting installation of the Symantec Messaging Gateway 10.5
appliance?
A. console access to the appliance
B. DVD-ROM drive listed on hardware compatibility list
C. valid license file
D. machine account created in Active Directory
Answer: A
Symantec examen certification ST0-250 ST0-250 examen certification ST0-250
NO.3 What should an administrator do before performing a software update of Symantec
Messaging Gateway 10.5?
A. Store backup on local server
B. Store backup on a remote location using FTP
C. Encrypt local backup
D. Purge all backups from the appliance
Answer: C
Symantec certification ST0-250 certification ST0-250
NO.4 Symantec Messaging Gateway 10.5 will be deployed to receive mail directly from the Internet.
In this situation, which option should be selected within the Inbound Mail Filtering - Accepted Hosts
step of the site setup wizard?
A. Enable MX lookup
B. Define a list of domains
C. Specify IP addresses/domains
D. Select all IP addresses
Answer: D
Symantec examen certification ST0-250 ST0-250 certification ST0-250
NO.5 Which directory data source function must be enabled to help prevent a directory harvest
attack?
A. Active Directory connector
B. Dynamic Data Sourcing
C. LDAP authentication
D. Recipient validation
Answer: D
Symantec examen ST0-250 examen certification ST0-250 ST0-250 examen ST0-250 examen certification ST0-250
没有评论:
发表评论