Le plus récent matériel de formation Juniper JN0-102 JN0-740

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification Juniper JN0-740 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.

Dépenser assez de temps et d'argent pour réussir le test Juniper JN0-102 ne peut pas vous assurer à passer le test Juniper JN0-102 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.

Code d'Examen: JN0-102
Nom d'Examen: Juniper (Junos, Associate (JNCIA-Junos))
Questions et réponses: 319 Q&As

Code d'Examen: JN0-740
Nom d'Examen: Juniper (ACX, Specialist (JNCIS-ACX))
Questions et réponses: 270 Q&As

Après une longue attente, les documentations de test Juniper JN0-740 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Juniper JN0-740 à la première fois.

Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification Juniper JN0-102, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test Juniper JN0-102.

JN0-102 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-102.html

NO.1 Which J-Web tab do you use to add licenses to the device?
A. "Configure"
B. "Troubleshoot"
C. "Monitor"
D. "Maintain"
Answer: D

Juniper   JN0-102   certification JN0-102   JN0-102 examen   certification JN0-102

NO.2 What is the role of route preference?
A. It is used as a tiebreaker when the same prefix is available through multiple protocols.
B. It is used to determine the preferred path to a given destination.
C. It is used to select the best route between multiple equal-cost paths.
D. It is used to select which routing table to use for forwarding.
Answer: A

certification Juniper   JN0-102 examen   JN0-102 examen

NO.3 What represents the decimal equivalence of 11100101?
A. 5
B. 93
C. 177
D. 229
Answer: D

Juniper   certification JN0-102   JN0-102   certification JN0-102

NO.4 What represents the binary equivalence of 207?
A. 11001111
B. 11101011
C. 11010111
D. 11010101
Answer: A

Juniper examen   JN0-102   certification JN0-102

NO.5 A packet is evaluated against three user-defined terms within a firewall filter and no match is
found.
What correctly describes the action the firewall filter will take for this packet?
A. The filter will permit the packet and take no additional action.
B. The filter will reject the packet and send an ICMP message back to the sender.
C. The filter will discard the packet and take no additional action.
D. The filter will permit the packet and write a log entry to the firewall log.
Answer: C

Juniper   certification JN0-102   JN0-102

NO.6 You have been allocated a 192.168.100.0/ 22 network.
How many usable hosts are available?
A. 510
B. 512
C. 1022
D. 1024
Answer: C

certification Juniper   JN0-102 examen   JN0-102 examen

NO.7 Which two statements accurately describe a broadcast domain? (Choose two.)
A. Broadcast domains require that the participating devices connect to common switches or hubs.
B. Broadcast domains consist of devices reachable by frames addressed to the Layer 2 broadcast
address.
C. Broadcast domains require a gateway device such as a router.
D. Broadcast domains consist of devices that reside on the same VLAN.
Answer: B,D

certification Juniper   JN0-102   JN0-102 examen   certification JN0-102   certification JN0-102

NO.8 Which command is used to enable access to J-Web using HTTPS?
A. set system remote-access profile https
B. set services remote-access profile j-web-https
C. set system services web-management https
D. set services web-management j-web-https
Answer: C

Juniper examen   JN0-102 examen   certification JN0-102   certification JN0-102   certification JN0-102   certification JN0-102

Les meilleures Juniper JN0-692 JN0-102 JN0-696 examen pratique questions et réponses

Un bon choix de l'outil à se former est le point essentiel à passer le test Juniper JN0-692, et les documentations à propos de rechercher le test Juniper JN0-692 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Juniper JN0-102 et passer le test à la première fois.

JN0-696 est un test de Juniper Certification, donc réussir JN0-696 est le premier pas à mettre le pied sur la Certifiction Juniper. Ça peut expliquer certiainement pourquoi le test Juniper JN0-696 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test JN0-696. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?

Pass4Test est un site à offrir les Q&As de tout les tests Certification IT. Chez Pass4Test, vous pouvez trouvez de meilleurs matériaux. Nos guides d'étude vous permettent de réussir le test Certification Juniper JN0-696 sans aucune doute, sinon nous allons rendre votre argent d'acheter la Q&A et la mettre à jour tout de suite, en fait, c'est une situation très rare. Bien que il existe plusieurs façons à améliorer votre concurrence de carrière, Pass4Test est lequel plus efficace : Moins d'argent et moins de temps dépensés, plus sûr à passer le test Certification. De plus, un an de service après vendre est gratuit pour vous.

Code d'Examen: JN0-692
Nom d'Examen: Juniper (Service Provider Routing and Switching Support, Professional)
Questions et réponses: 171 Q&As

Code d'Examen: JN0-102
Nom d'Examen: Juniper (Junos, Associate (JNCIA-Junos))
Questions et réponses: 319 Q&As

Code d'Examen: JN0-696
Nom d'Examen: Juniper (Security Support, Professional (JNCSP-SEC))
Questions et réponses: 36 Q&As

Si vous êtes intéressé par l'outil formation Juniper JN0-696 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

JN0-696 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-696.html

NO.1 You are having problems establishing an IPsec tunnel between two SRX Series devices.
What are two explanations for this problem? (Choose two.)
A. proposal mismatch
B. antivirus configuration
C. preshared key mismatch
D. TCP MSS clamping is disabled
Answer: B,D

Juniper examen   JN0-696 examen   certification JN0-696

NO.2 Two SRX Series devices are having problems establishing an IPsec VPN session. One of the
devices has a firewall filter applied to its gateway interface that rejects UDP traffic.
What would resolve the problem?
A. Disable the IKE Phase 1 part of the session establishment.
B. Disable the IKE Phase 2 part of the session establishment.
C. Change the configuration so that session establishment uses TCP .
D. Edit the firewall filter to allow UDP port 500.
Answer: A

certification Juniper   certification JN0-696   certification JN0-696   JN0-696 examen

NO.3 Your SRX Series device has the following configuration:
user@host> show security policies
...
Policy: my-policy, State: enabled, Index: 5, Sequence number: 1
Source addresses: any Destination addresses: any
Applications: snmp
Action: reject
From zone: trust, To zone: untrust
...
When traffic matches my-policy, you want the device to silently drop the traffic; however, you
notice that the device is replying with ICMP unreachable messages instead.
What is causing this behavior?
A. the snmp application
B. the reject action
C. the trust zone
D. the untrust zone
Answer: C

Juniper examen   JN0-696 examen   JN0-696 examen

NO.4 You want to allow remote users using PCs running Windows 7 to access the network using an
IPsec VPN. You implement a route-based hub-and-spoke VPN; however, users report that they are
not able to access the network.
What is causing this problem?
A. The remote clients do not have proper licensing.
B. Hub-and-spoke VPNs cannot be route-based; they must be policy-based.
C. The remote clients' OS is not supported.
D. Hub-and-spoke VPNs do not support remote client access; a dynamic VPN must be implemented
instead.
Answer: B

Juniper examen   certification JN0-696   JN0-696   certification JN0-696

NO.5 Users at a branch office report that they cannot reach an internal Web server. The users
connect through a single SRX Series device to reach the Web server. A security policy has been
configured on the device that allows traffic to flow between interfaces in the Trust zone.
What is causing this problem?
A. The interface on the device that connects to the Web server is not in the Trust zone.
B. The IPsec VPN connection between the users and the Web server is down.
C. There is a host inbound traffic configuration problem.
D. There is an antispam configuration problem.
Answer: C

certification Juniper   JN0-696 examen   certification JN0-696   JN0-696 examen   JN0-696 examen

NO.6 You notice that the secondary node of a chassis cluster has become disabled.
What caused this behavior?
A. The fxp0 interface on the secondary device failed.
B. The control link between the devices failed.
C. A reth on the secondary device failed.
D. An IPsec tunnel between the two devices failed.
Answer: D

Juniper examen   JN0-696 examen   JN0-696 examen   JN0-696

Le dernier examen Juniper JN0-120 JN0-730 JN0-314 gratuit Télécharger

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Juniper JN0-120 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Juniper JN0-730 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Juniper JN0-730 est le rêve pour les professionnels ambitieux.

Le test Juniper JN0-314 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.

Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Juniper JN0-314. Ajoutez la Q&A au panier.

Code d'Examen: JN0-120
Nom d'Examen: Juniper (Juniper networks Certified internet associate.e(jncia-e))
Questions et réponses: 120 Q&As

Code d'Examen: JN0-730
Nom d'Examen: Juniper (DX, Specialist (JNCIS-DX))
Questions et réponses: 270 Q&As

Code d'Examen: JN0-314
Nom d'Examen: Juniper (Junos Pulse Access Control, Specialist (JNCIS-AC))
Questions et réponses: 222 Q&As

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Juniper JN0-314. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Juniper JN0-314 sans aucune doute.

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Juniper JN0-314 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Juniper JN0-314 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Juniper JN0-314 plus facilement avec la Q&A de Pass4Test.

JN0-120 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-120.html

NO.1 Which protocol is used to transfer files to on the ERX Edge Router? (Choose two.)
A. SCP
B. FTP
C. RCP
D. TFTP
Answer: B,D

certification Juniper   JN0-120 examen   JN0-120

NO.2 Given the following router output, which configuration file will the router use at its next reload?
A. config
B. clientqos.cnf
C. startup-config
D. running-configuration
Answer: D

Juniper examen   certification JN0-120   certification JN0-120   JN0-120 examen

NO.3 A service provider is operating a Routed 1483 network where the ATM PVCs are treated as a large
subnet. What is a consequence of this configuration?
A. It burns up IP addresses.
B. It conserves IP addresses.
C. It results in a smaller routing table.
D. Each PVC has a separate /30 subnet.
Answer: B

Juniper examen   certification JN0-120   certification JN0-120   certification JN0-120

NO.4 You would like to configure an ATM PVC with a virtual circuit identifier of 33 on virtual path 0. The PVC
should use an unspecified bit rate and be encapsulated in the AAL5SNAP format. Which command
accomplishes this goal?
A. atm pvc 0/33 aal5snap
B. atm pvc 33 0 33 aal5snap
C. atm pvc 0/33 aal5snap ubr
D. atm pvc 33 0 33 aal5snap ubr
Answer: B

Juniper examen   certification JN0-120   certification JN0-120   JN0-120 examen   certification JN0-120

NO.5 Which protocol is used between the RAS and the authentication server in a narrowband network
environment?
A. RADIUS
B. PPP PAP
C. MS CHAP
D. PPP CHAP
Answer: A

Juniper examen   certification JN0-120   JN0-120 examen   JN0-120

NO.6 Where should you install the spare line module in a redundancy group?
A. last slot in the chassis
B. first slot in the chassis
C. lowest numbered slot in the group
D. highest numbered slot in the group
Answer: C

Juniper   JN0-120 examen   JN0-120 examen   certification JN0-120   JN0-120 examen   JN0-120 examen

NO.7 Your ERX router is supporting 100 virtual routers. A specific line module supports IP interfaces in 5
virtual routers. How many routing tables are maintained on that module?
A. 0
B. 1
C. 5
D. 100
Answer: C

certification Juniper   JN0-120 examen   certification JN0-120   certification JN0-120   certification JN0-120

NO.8 By default, how does the router handle changes to its operational configuration?
A. Changes are not implemented, but are saved automatically.
B. Changes are not implemented and must be written into memory.
C. Changes are implemented immediately and saved automatically.
D. Changes are implemented immediately, but must be written into memory.
Answer: C

certification Juniper   JN0-120 examen   JN0-120   certification JN0-120   certification JN0-120

Pass4Test offre de Juniper JN0-343 JN0-692 JN0-521 matériaux d'essai

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Juniper JN0-343. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de JN0-343, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Peut-être vous voyez les guides d'études similaires pour le test Juniper JN0-692, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Juniper JN0-692 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

Code d'Examen: JN0-343
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
Questions et réponses: 498 Q&As

Code d'Examen: JN0-692
Nom d'Examen: Juniper (Service Provider Routing and Switching Support, Professional)
Questions et réponses: 171 Q&As

Code d'Examen: JN0-521
Nom d'Examen: Juniper (FWV.Associate (JNCIA-FWV))
Questions et réponses: 119 Q&As

Le test Juniper JN0-343 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test Juniper JN0-343. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.

Le Certificat de Juniper JN0-521 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Juniper JN0-521, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test JN0-521 sans aucun éffort, en même temps, le test de Juniper JN0-521 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Juniper JN0-521 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

JN0-692 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-692.html

NO.1 Your currently configured regular expression does not match the AS path shown below:
2135.55 55 55 55 3796
Which three regular expressions would match this path? (Choose three.)
A. "."2135"
B. "2135.*"
C. "* 55(1, 3) *"
D. "2135 55(5) 3796"
E. "2135 55(1, 2) 3796"
Answer: B,C,E

Juniper examen   JN0-692 examen   certification JN0-692   JN0-692   JN0-692 examen

NO.2 Your OSPF network includes an NSSA. Which LSA type is injected into the NSSA by the ASBR?
A. Type 3
B. Type 5
C. Type 7
D. Type 9
Answer: C

Juniper examen   JN0-692 examen   certification JN0-692

NO.3 One of your router's OSPF adjacencies is down.
What are three reasons for this adjacency state change? (Choose Three)
A. A filter has just been configured on one of the OSPF routers.
B. The OSPF hello value is the same on both routers.
C. The controlling BFD session state has gone down.
D. The authentication key on both routers matches.
E. One of the physical interfaces has gone down.
Answer: A,C,E

Juniper examen   JN0-692 examen   JN0-692 examen   JN0-692 examen

NO.4 You have recently added LDP-signaled VPLS to your network. The VPLS connections are
established and you have been asked to verify that the forwarding plane is working properly. Which
three commands would you use? (Choose three.)
A. ping mpls Idp <fec>
B. show vpls connections
C. traceroute mpls Idp <fec>
D. show vpls mac-table
E. show Idp statistics
Answer: A,C,D

Juniper   certification JN0-692   certification JN0-692   JN0-692 examen   certification JN0-692
10. R1 and R2 are IS-IS Level 1 routers, but are not forming an adjacency.
Which two reasons would account for this happening? (Choose two.)
A. The remote router is configured for both IPv4 and IPv6.
B. The remote router does not have family iso enabled on its interface,
C. The remote router does not have family clns enabled on its interface.
D. The remote router is not configured to participate in the same Level 1 area
Answer: B,D

Juniper examen   JN0-692 examen   JN0-692 examen   JN0-692 examen   JN0-692 examen

NO.5 You are asked to retain several routes from an external BGP neighbor in the routing table on
your local router, but you are not allowed to forward traffic to these destinations. You have
configured a forwarding table firewall filter to block these routes, and applied it under the (edit
forwarding-options] hierarchy, but the routes are still showing up in the forwarding table. What is
required to achieve this task?
A. Configure an EBGP import policy on your local router to block the routes.
B. Have the EBGP neighbor configure an export policy to block the routes.
C. Configure an export policy for the forwarding table to block the routes.
D. Use the no-install configuration statement within the EBGP neighbor group on your local router.
Answer: C

Juniper   certification JN0-692   JN0-692 examen   JN0-692 examen   JN0-692

NO.6 You recently added your autonomous system to an existing BGP confederation. You notice that
a route that had a local preference of 100 now has a local preference of 50. Which statement
explains the change?
A. BGP path attributes such as next hop, local preference, and MED are normally restricted to a
single AS but are allowed to propagate throughout the confederation's AS members.
B. The confederation has sub-ASs that require all IBGP routes to have a local preference of 50 or
below.
C. When your Junos devices joined the confederation, they lost IBGP connectivity to the route in
question; the local preference reverted to 50 once the BGP peering established.
D. The route is being shared through an EBGP peer, and the confederation is propagating the local
preference from the peer.
Answer: A

certification Juniper   JN0-692   certification JN0-692   JN0-692   JN0-692

NO.7 You have applied a customized EXP rewrite rule on router R1 on the egress of the interface
connecting to router R2. You want to verify if it is working properly. Which two methods would you
use to accomplish this task? (Choose two.)
A. Apply a rewrite rule on the ingress of R2 for packets coming in from R1 and count those packets
for the new EXP values with a firewall filter as they leave R2.
B. Use the traceroute utility.
C. Use an output filter on R1 that matches and counts on various EXP values on packets going to R2.
D. Use an input firewall filter on R2 that matches and counts on various EXP values on packets
coming from R1.
Answer: C,D

certification Juniper   JN0-692 examen   JN0-692 examen   certification JN0-692   certification JN0-692   JN0-692 examen

NO.8 An OSPF neighbor between routers R1 and R2 is stuck in loading state on R2. What are two
causes? (Choose two.)
A. OSPF is not enabled on the interfaces.
B. A firewall filter is blocking OSPF hellos on both sides.
C. The R1 router has received a corrupted link-state request packet.
D. The interface MTU is mismatched between the routers.
Answer: C,D

certification Juniper   JN0-692 examen   JN0-692 examen

Pass4Test offre de Juniper JN0-660 JN0-102 matériaux d'essai

Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test JN0-102 est lequel très important dans les tests de Certification Juniper. Pour être qualifié de Juniper, on doit obtenir le passport de test Juniper JN0-102.

Pass4Test est un site à offrir particulièrement la Q&A Juniper JN0-660, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Juniper JN0-660, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Juniper JN0-660 et même se renforcer vos connaissances professionnelles IT.

Code d'Examen: JN0-660
Nom d'Examen: Juniper (Service Provider Routing and Switching, Professional (JNCIP-SP))
Questions et réponses: 247 Q&As

Code d'Examen: JN0-102
Nom d'Examen: Juniper (Junos, Associate (JNCIA-Junos))
Questions et réponses: 319 Q&As

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Juniper JN0-102. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Juniper JN0-660 à la première fois.

JN0-660 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-660.html

NO.1 Click the Exhibit button.
Given the drop profile in the exhibit, what is the drop probability when the buffer reaches 90% full?
A. 60%
B. 70%
C. 85%
D. 90%
Answer: B

certification Juniper   certification JN0-660   JN0-660 examen   JN0-660 examen

NO.2 Click the Exhibit button.
Based on the configuration in the exhibit, which statement is correct?
A. The 172.20.20.0/24 route is installed in the inet.0 table with the next hop of the LSP.
B. The 172.20.20.0/24 route is installed in the mpls.0 table with the next hop of the LSP.
C. The 172.20.20.0/24 route is installed in the inet.3 table with the next hop of the LSP.
D. The 172.20.20.0/24 route is installed in the inet6.3 table with the next hop of the LSP.
Answer: C

certification Juniper   certification JN0-660   certification JN0-660   JN0-660 examen   certification JN0-660

NO.3 Click the Exhibit button.
In the exhibit, ISP A is charged a higher rate for traffic sent to R2. You are asked to lower costs for ISP A
by configuring R1 to send traffic to R3 whenever possible.
What are two ways to do this? (Choose two.)
A. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 120
B. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 80
C. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 120
D. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 80
Answer: B, C

Juniper examen   JN0-660 examen   JN0-660 examen   certification JN0-660   JN0-660 examen

NO.4 Click the Exhibit button.
As shown in the exhibit, you have an adaptive LSP that requires 85 Mbps. The LSP is configured with a
primary path and a secondary path in standby mode. All connections in the MPLS network are Fast
Ethernet. Which statement is correct?
A. The primary and secondary paths are in an up state and operational.
B. The primary and secondary paths are in a down state and not operational.
C. The secondary path is in a down state and not operational.
D. The primary path is in a down state and not operational.
Answer: A

Juniper examen   JN0-660   certification JN0-660   certification JN0-660   JN0-660 examen

NO.5 Click the Exhibit button.
All networks shown in the exhibit contain more than one BGP speaking router. You operate ISP A.
You must ensure that customer Y sends their traffic to you over the directly connected link but customer Y
is not used for transit into your network. What do you do to accomplish this? A. Advertise routes to
customer Y with the well-known no-transit community.
B. Advertise routes to customer X with the well-known no-advertise community.
C. Advertise routes to customer Y with the well-known no-export community.
D. Advertise routes to customer X with the well-known as-transit community.
Answer: C

certification Juniper   certification JN0-660   certification JN0-660   JN0-660

NO.6 Click the Exhibit button.
You are asked to configure an OSPF network based on the topology shown in the exhibit. You must keep
the link-state database in Area 1 as small as possible. What will accomplish this?
A. Area 0 should be configured as a stub area so that it will not announce routes into Area 1.
B. Area 1 should be configured as an NSSA to limit the size of the link-state database.
C. Area 1 should be configured as a stub area with no-summaries to limit the size of the link-state
database.
D. Area 0 should be configured with a virtual link to R4 to limit the size of the Area 1 link-state database.
Answer: C

Juniper examen   JN0-660   certification JN0-660

NO.7 Click the Exhibit button.
Referring to the exhibit, which type of traffic protection mechanism is used for the LSP?
A. fast-reroute
B. link-protection
C. node-link-protection
D. secondary
Answer: B

certification Juniper   certification JN0-660   certification JN0-660   certification JN0-660

NO.8 Click the Exhibit button.
In the exhibit, Area 1 is a not-so-stubby area.
Three networks are redistributed into Area 1 on R2.
You must summarize the redistributed network addresses in Area 1 so that only one network prefix is
re-advertised into Area 0. You must also summarize the loopback addresses of R1 and R2 into a single
address in Area 0.Which configuration sample on R3 and R5 will complete this task?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

certification Juniper   certification JN0-660   certification JN0-660

Certification Juniper de téléchargement gratuit pratique d'examen JN0-533, questions et réponses

La Q&A de Pass4Test vise au test Certificat Juniper JN0-533. L'outil de formation Juniper JN0-533 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Juniper JN0-533 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Le test simulation Juniper JN0-533 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Juniper JN0-533 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

Code d'Examen: JN0-533
Nom d'Examen: Juniper (FWV, Specialist (JNCIS-FWV))
Questions et réponses: 110 Q&As

Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

Pass4Test vous offre un choix meilleur pour faire votre préparation de test Juniper JN0-533 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Juniper JN0-533 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Juniper JN0-533 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.

JN0-533 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-533.html

NO.1 Which two statements are true about policy-based VPNs as compared to route-based IPsec
VPNs when using ScreenOS devices? (Choose two.)
A. For policy-based IPsec VPNs, you can configure 0.0.0.0/ 0 as the proxy ID on both VPN gateways
regardless of the security policy.
B. For route-based IPsec VPNs, you can configure 0.0.0.0/ 0 as the proxy ID on both VPN gateways
regardless of the security policy.
C. For route-based IPsec VPNs, the proxy ID is derived from the policy.
D. For policy-based IPsec VPNs, the proxy ID is derived from the policy.
Answer: B,D

certification Juniper   JN0-533 examen   JN0-533 examen   JN0-533

NO.2 You have configured integrated Web filtering in the ScreenOS software. A URL appears in the
blacklist, the whitelist, and a user-defined category. Additionally, the device can obtain
categorization information from the SurfControl server.
Which configuration will the device use to determine the action to take for Web requests for the
URL?
A. the blacklist
B. the SurfControl categorization
C. the user-defined category
D. the whitelist
Answer: A

Juniper   certification JN0-533   certification JN0-533   JN0-533

NO.3 HostA is in the Trust zone and has an IP address of. ServerA is a Web server in the DMZ zone
and has an IP address of.
Which three configuration statements are required to allow traffic from HostA to communicate with
ServerA? (Choose three.)
A. ssg5-> set address Trust HostA / 32
B. ssg5-> set policy from DMZ to Trust ANY ANY ANY permit
C. ssg5-> set address DMZ ServerA / 32
D. ssg5-> set policy from Trust to DMZ HostA ServerA HTTP permit
E. ssg5-> set address Trust HostA / 32
Answer: C,D,E

Juniper   certification JN0-533   JN0-533   JN0-533 examen   JN0-533

NO.4 You want to set up a last resort route and prevent route lookups in either the source-based
routing table or the destination-based routing table.
What should you do?
A. Disable SIBR and create a default route in the trust-vr table using the null interface as the
outgoing interface with a higher metric than other routes.
B. Disable SIBR and create a default route in the trust-vr table using the null interface as the
outgoing interface with a lower metric than other routes.
C. Enable SIBR and create a default route in the SIBR table using the null interface as the outgoing
interface with a higher metric than other routes.
D. Enable SIBR and create a default route in the SIBR table using the null interface as the outgoing
interface with a lower metric than other routes.
Answer: C

Juniper   certification JN0-533   certification JN0-533   JN0-533 examen

NO.5 Click the Exhibit button.
In the exhibit, you have configured the MIP address 1.1.8.64 on a ScreenOS device.
Which statement is correct?
A. It performs one-to-one address translation and maps 1.1.8.64 to 10.1.10.64.
B. It performs one-to-many address translation and maps 1.1.8.64 to a range from 10.1.10.64 to
10.1.10.71.
C. It performs range address translation and maps 1.1.8.64 to 10.1.10.64, 1.1.8.65 to 10.1.10.65,
etc..
D. It performs address translation using a random IP address from the pool for 10.1.10.64 / 29.
Answer: C

Juniper examen   certification JN0-533   JN0-533   certification JN0-533

NO.6 Which two statements are true about VPN Monitor on a ScreenOS device? (Choose two.)
A. With a route-based VPN failure, VPN Monitor marks the tunnel interface status as down.
B. With a policy-based VPN failure, VPN Monitor marks the tunnel interface status as down.
C. VPN Monitor uses UDP to detect a VPN connection failure.
D. VPN Monitor uses ICMP to detect a VPN connection failure.
Answer: A,D

Juniper   JN0-533   JN0-533   JN0-533 examen

NO.7 Click the Exhibit button.
Which two statements are true regarding the route shown in the exhibit? (Choose two.)
A. 5.5.5.0/ 24 was configured as a source route with a next-hop IP address of 1.1.1.1 in the trustvr.
B. 5.5.5.0/ 24 was configured as a destination route with a next-hop IP address of 1.1.1.1 in the
trust-vr.
C. 5.5.5.0/ 24 was configured as a SIBR route with a next-hop IP address of 1.1.1.1 in the trust-vr.
D. 5.5.5.0/ 24 was configured as a permanent source route.
Answer: A,D

certification Juniper   JN0-533   JN0-533 examen   JN0-533   JN0-533

NO.8 Click the Exhibit button.
Referring to the exhibit, what is the appropriate VPN monitor status?
A. The VPN is active and the peer is down.
B. The VPN is active and VPN Monitor is not configured for the peer.
C. The VPN is active and the peer is up.
D. The VPN is inactive and VPN Monitor is not configured for the peer.
Answer: B

certification Juniper   certification JN0-533   JN0-533   certification JN0-533   JN0-533 examen

NO.9 -- Exhibit -set admin name "admin" set admin password "nOsYMqrbAs/McFsJrs6HwcIt3AF6yn"
set admin user "User1" password "nLZwKErINPPCcphC6sFMXrJ" privilege "read-only" set admin port
8080 set admin access attempts 5 set admin access lock-on-failure 5 set admin auth web timeout 10
set admin auth server "Local" -- Exhibit -
User1 wants to create the policy in the ScreenOS device, but is not successful. Referring to the
exhibit, what is the problem?
A. The User1 account has been suspended.
B. User1 does not have any account in this device.
C. User1 logged in to the device with wrong port.
D. User1 does not have the proper permission to create a policy.
Answer: D

certification Juniper   JN0-533 examen   JN0-533   certification JN0-533   JN0-533

NO.10 Which two configuration elements are synchronized between the members of an NSRP cluster?
(Choose two.)
A. interface IP addresses
B. hostname
C. track IP configuration
D. static routes
Answer: A,D

Juniper examen   JN0-533 examen   JN0-533 examen   JN0-533

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Juniper JN0-533, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

Le dernier examen Juniper JN0-692 gratuit Télécharger

La Q&A Juniper JN0-692 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Juniper JN0-692.

Vous avez aussi la possibilité à réussir le test Juniper JN0-692. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Code d'Examen: JN0-692
Nom d'Examen: Juniper (Service Provider Routing and Switching Support, Professional)
Questions et réponses: 171 Q&As

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Juniper JN0-692 et passer le test à la première fois.

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Juniper JN0-692 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

JN0-692 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-692.html

NO.1 An OSPF neighbor between routers R1 and R2 is stuck in loading state on R2. What are two
causes? (Choose two.)
A. OSPF is not enabled on the interfaces.
B. A firewall filter is blocking OSPF hellos on both sides.
C. The R1 router has received a corrupted link-state request packet.
D. The interface MTU is mismatched between the routers.
Answer: C,D

Juniper   certification JN0-692   JN0-692   certification JN0-692   JN0-692

NO.2 You have recently implemented a new Layer 2 VPN and it is not establishing. The show I2vpn
connections command displays an out-of-range state.
What is causing this problem?
A. The local site ID value is too high for the label block.
B. The VRF target community values do not match between sites.
C. The VRF route distinguisher values do not match between sites.
D. The local site ID is not defined.
Answer: A

certification Juniper   JN0-692 examen   certification JN0-692   certification JN0-692   JN0-692

NO.3 You have recently added LDP-signaled VPLS to your network. The VPLS connections are
established and you have been asked to verify that the forwarding plane is working properly. Which
three commands would you use? (Choose three.)
A. ping mpls Idp <fec>
B. show vpls connections
C. traceroute mpls Idp <fec>
D. show vpls mac-table
E. show Idp statistics
Answer: A,C,D

Juniper   JN0-692 examen   certification JN0-692
10. R1 and R2 are IS-IS Level 1 routers, but are not forming an adjacency.
Which two reasons would account for this happening? (Choose two.)
A. The remote router is configured for both IPv4 and IPv6.
B. The remote router does not have family iso enabled on its interface,
C. The remote router does not have family clns enabled on its interface.
D. The remote router is not configured to participate in the same Level 1 area
Answer: B,D

certification Juniper   certification JN0-692   JN0-692   JN0-692 examen   certification JN0-692

NO.4 Your OSPF network includes an NSSA. Which LSA type is injected into the NSSA by the ASBR?
A. Type 3
B. Type 5
C. Type 7
D. Type 9
Answer: C

Juniper   JN0-692 examen   JN0-692   certification JN0-692

NO.5 You recently added your autonomous system to an existing BGP confederation. You notice that
a route that had a local preference of 100 now has a local preference of 50. Which statement
explains the change?
A. BGP path attributes such as next hop, local preference, and MED are normally restricted to a
single AS but are allowed to propagate throughout the confederation's AS members.
B. The confederation has sub-ASs that require all IBGP routes to have a local preference of 50 or
below.
C. When your Junos devices joined the confederation, they lost IBGP connectivity to the route in
question; the local preference reverted to 50 once the BGP peering established.
D. The route is being shared through an EBGP peer, and the confederation is propagating the local
preference from the peer.
Answer: A

Juniper   JN0-692   JN0-692   JN0-692   JN0-692 examen

NO.6 One of your router's OSPF adjacencies is down.
What are three reasons for this adjacency state change? (Choose Three)
A. A filter has just been configured on one of the OSPF routers.
B. The OSPF hello value is the same on both routers.
C. The controlling BFD session state has gone down.
D. The authentication key on both routers matches.
E. One of the physical interfaces has gone down.
Answer: A,C,E

Juniper examen   JN0-692   JN0-692 examen   JN0-692

NO.7 You are asked to retain several routes from an external BGP neighbor in the routing table on
your local router, but you are not allowed to forward traffic to these destinations. You have
configured a forwarding table firewall filter to block these routes, and applied it under the (edit
forwarding-options] hierarchy, but the routes are still showing up in the forwarding table. What is
required to achieve this task?
A. Configure an EBGP import policy on your local router to block the routes.
B. Have the EBGP neighbor configure an export policy to block the routes.
C. Configure an export policy for the forwarding table to block the routes.
D. Use the no-install configuration statement within the EBGP neighbor group on your local router.
Answer: C

certification Juniper   JN0-692   JN0-692

NO.8 Your currently configured regular expression does not match the AS path shown below:
2135.55 55 55 55 3796
Which three regular expressions would match this path? (Choose three.)
A. "."2135"
B. "2135.*"
C. "* 55(1, 3) *"
D. "2135 55(5) 3796"
E. "2135 55(1, 2) 3796"
Answer: B,C,E

Juniper   JN0-692 examen   JN0-692 examen   certification JN0-692

NO.9 You have applied a customized EXP rewrite rule on router R1 on the egress of the interface
connecting to router R2. You want to verify if it is working properly. Which two methods would you
use to accomplish this task? (Choose two.)
A. Apply a rewrite rule on the ingress of R2 for packets coming in from R1 and count those packets
for the new EXP values with a firewall filter as they leave R2.
B. Use the traceroute utility.
C. Use an output filter on R1 that matches and counts on various EXP values on packets going to R2.
D. Use an input firewall filter on R2 that matches and counts on various EXP values on packets
coming from R1.
Answer: C,D

certification Juniper   certification JN0-692   JN0-692   certification JN0-692

Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Juniper JN0-692.

Pass4Test offre de Juniper JN0-730 JN0-533 JN0-633 JN0-380 JN0-370 JN0-355 matériaux d'essai

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Pass4Test possède un l'outil de formation particulier à propos de test Juniper JN0-730 JN0-533 JN0-633 JN0-380 JN0-370 JN0-355. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Juniper JN0-730 JN0-533 JN0-633 JN0-380 JN0-370 JN0-355 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.

Code d'Examen: JN0-730
Nom d'Examen: Juniper (DX, Specialist (JNCIS-DX))
Questions et réponses: 270 Q&As

Code d'Examen: JN0-533
Nom d'Examen: Juniper (FWV, Specialist (JNCIS-FWV))
Questions et réponses: 110 Q&As

Code d'Examen: JN0-633
Nom d'Examen: Juniper (Security, Professional (JNCIP-SEC) Exam)
Questions et réponses: 110 Q&As

Code d'Examen: JN0-380
Nom d'Examen: Juniper (Wireless LAN, Specialist (JNCIS-WLAN))
Questions et réponses: 86 Q&As

Code d'Examen: JN0-370
Nom d'Examen: Juniper (QFabric, Specialist (JNCIS-QF))
Questions et réponses: 108 Q&As

Code d'Examen: JN0-355
Nom d'Examen: Juniper (Junos Pulse Secure Access, Specialist (JNCIS-SA))
Questions et réponses: 115 Q&As

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

La Q&A Juniper JN0-730 JN0-533 JN0-633 JN0-380 JN0-370 JN0-355 de Pass4Test est liée bien avec le test réel de Juniper JN0-730 JN0-533 JN0-633 JN0-380 JN0-370 JN0-355. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Juniper JN0-730 JN0-533 JN0-633 JN0-380 JN0-370 JN0-355 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

Dernières Juniper JN0-321 de la pratique de l'examen questions et réponses téléchargement gratuit

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Juniper JN0-321 est bien autorisé. Avec le certificat Juniper JN0-321, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Juniper JN0-321.

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Juniper JN0-321. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de JN0-321, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

Certification Juniper JN0-321 est un des tests plus importants dans le système de Certification Juniper. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Juniper JN0-321 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.

Il y a nombreux façons à vous aider à réussir le test Juniper JN0-321. Le bon choix est l'assurance du succès. Pass4Test peut vous offrir le bon outil de formation, lequel est une documentation de qualité. La Q&A de test Juniper JN0-321 est recherchée par les experts selon le résumé du test réel. Donc l'outil de formation est de qualité et aussi autorisé, votre succès du test Juniper JN0-321 peut bien assuré. Nous allons mettre le jour successivement juste pour répondre les demandes de tous candidats.

Pass4Test est un seul site de provider le guide d'étude Juniper JN0-321 de qualité. Peut-être que vous voyiez aussi les Q&A Juniper JN0-321 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Code d'Examen: JN0-321
Nom d'Examen: Juniper (DX, Associate(JNCIA-DX))
Questions et réponses: 120 Q&As

JN0-321 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-321.html

NO.1 Which two are initial configuration steps using the console? (Choose two.)
A. Enable HTTPS for WebUI access.
B. Agree to the license.
C. Configure fullyqualified domain name.
D. Configure console port parameters.
Answer: BC

Juniper   JN0-321   JN0-321 examen   JN0-321   JN0-321 examen

NO.2 Which system elements are exported when using the system snapshot feature?
A. tsdump, tcpdump, current debug and memory states
B. current memory states
C. system process data, system logs, system debug statistics and system passkeys
D. system software, users, configuration, licenses, app rules, SSL certificates and keys
Answer: D

Juniper   JN0-321 examen   JN0-321   certification JN0-321

NO.3 Which two functions require the use of the CLI? (Choose two.)
A. running a tcpdump
B. adding a VLAN
C. adding a cluster
D. adding a target server
Answer: AB

Juniper   certification JN0-321   JN0-321   JN0-321

NO.4 Which HTTP return code should be verified when configuring the cache?
A. 302
B. 200
C. 304
D. 501
Answer: B

Juniper   JN0-321 examen   JN0-321 examen

NO.5 Which protocols are used to export and import configurations?
A. TFTP or SCP
B. TFTP or SMTP
C. FTP or SCP
D. FTP or TFTP
Answer: A

certification Juniper   JN0-321   JN0-321   JN0-321   JN0-321 examen

NO.6 In which section of the WebUI does the administrator create and apply AppRules?
A. SLB
B. Cluster
C. Forwarder
D. Redirector
Answer: B

certification Juniper   certification JN0-321   JN0-321

NO.7 In the WebUI, which method will determine if a Cluster target host is available?
A. Click Statistics > Cluster Groups
B. Click Dashboard > Cluster group name
C. Click Services > Cluster Groups
D. Click Log > Audit
Answer: B

Juniper examen   certification JN0-321   certification JN0-321   JN0-321 examen   JN0-321 examen

NO.8 When running SSL on a nonweb application, where are the secure connections made?
A. between the client and the DX appliance and between the DX appliance and the target servers
B. directly between the client and the target server(s)
C. between the client and the DX appliance
D. between the DX appliance and the target server(s)
Answer: C

Juniper examen   certification JN0-321   JN0-321

NO.9 What do you need to upgrade the DXOS?
A. an upgrade .tar file placed on your SCP server
B. an upgrade CD provided by your Juniper Networks representative
C. an upgrade .pac file placed on your TFTP or SCP server
D. an upgrade .gz file placed on your FTP server
Answer: C

Juniper examen   JN0-321   JN0-321   JN0-321   JN0-321 examen

NO.10 An enterprise uses a Webtiered application that provides NTLM enduserauthentication.What is the
required Cluster option?
A. DSR
B. Connect Method
C. Connection Binding
D. Sticky Load Balancing
Answer: C

certification Juniper   JN0-321   JN0-321

NO.11 Which AppRule type is used to configure 3G caching?
A. PTH
B. RS
C. RTH
D. PTC
Answer: A

Juniper examen   certification JN0-321   JN0-321   JN0-321

NO.12 Which statement is true about "sticky" load balancing for Clusters?
A. The "clientip" setting does not apply to clusters, it only pertains to a Forwarder.
B. When set to "clientip" it uses the client's IP address to bind the client to a particular target server.
C. When set to "clientip" it ensures that all subsequent requests are directed to the same client that made
the initial request.
D. When set to "clientip" it allows a DX sticky cookie to be sent to and stored by the client based on the IP
address.
Answer: B

Juniper   JN0-321   JN0-321 examen   JN0-321   JN0-321

NO.13 Which steps are required to use the Juniper DXs ActiveN functionality?
A. Enable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
enableActiveN, synchronize configuration.
B. Disable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
enableActiveN, synchronize configuration.
C. Enable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
selectActiveN load balancing policy, enable sticky.
D. Disable DSR for your cluster, create ActiveN blades, create ActiveN groups and addblades,
selectActiveN load balancing policy, enable sticky.
Answer: A

Juniper   certification JN0-321   JN0-321 examen   JN0-321

NO.14 An enterprise has an internal web application that needs stickiness managed by aCluster. All
employeesaccess the application through a proxy. What is the correct sticky load balancing policy?
A. url persistency
B. cookie persistency
C. urlhash
D. default persistency
Answer: B

certification Juniper   JN0-321   certification JN0-321   JN0-321 examen

NO.15 A health care organization has a Juniper DX placed in front of a web server. Theycurrently have
listensideSSL enabled to encrypt traffic from the client to the DX appliance. Due to privacyconcerns, they
havedecided to enable SSL from the client to the server for endtoend SSL. Which twosteps are required
toenable endtoend encryption? (Choose two).
A. Disable clientside SSL on the DX and enable Unified SSL.
B. Enable targetside SSL on the DX.
C. Configure a Redirector on the DX to redirect browsers to the HTTPS port.
D. Enable SSL on the web server.
Answer: BD

Juniper   JN0-321 examen   JN0-321   JN0-321

NO.16 Which CLI command is used for analysis and troubleshooting of real time trafficcapture?
A. tcpdump
B. show server stats
C. tsdump
D. vmstat
Answer: A

Juniper   JN0-321   certification JN0-321   JN0-321 examen

NO.17 Your administrator wants to centralize logs from the DX appliance and Cluster. Whichtwo protocols
areavailable to export those logs? (Choose two.)
A. SMTP
B. syslog
C. SCP
D. TFTP
Answer: BC

Juniper   JN0-321 examen   JN0-321   JN0-321 examen   JN0-321

NO.18 In the Juniper DX Unified Failover configuration, the VMAC is active on whichdevice(s)?
A. The Standby DX(s)
B. The Master DX and the Active Server(s)
C. The Master DX
D. All DXs in the Unified Failover group
Answer: C

Juniper examen   certification JN0-321   JN0-321   certification JN0-321   JN0-321

NO.19 Which two benefits does the Juniper DX provide? (Choose two.)
A. It offloads TCP connections from servers.
B. It spools email messages.
C. It offloads SSL from servers.
D. It compresses images.
Answer: AC

certification Juniper   JN0-321   certification JN0-321   JN0-321

NO.20 Which three statements are correct using nitro.apprule on any web application? (Choosethree.)
A. Nitro.apprule provides advance http security on HTTPS applications.
B. Nitro.apprule provides caching on HTTP and HTTPS applications.
C. Nitro.apprule provides transaction guarantee on HTTP application.
D. Nitro.apprule improves client response time on HTTP applications.
E. Nitro.apprule provides advanced authentication on HTTPS applications.
Answer: ABD

Juniper   JN0-321   JN0-321 examen

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Juniper JN0-321, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Le plus récent matériel de formation Juniper JN0-330

Avec la version plus nouvelle de Q&A Juniper JN0-330, réussir le test Juniper JN0-330 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test Juniper JN0-330 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test Juniper JN0-330, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.

Pass4Test a de formations plus nouvelles pour le test Juniper JN0-330. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Juniper JN0-330 à tous les candidats qui nous choisissent. L'importance de Certification Juniper JN0-330 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.

Code d'Examen: JN0-330
Nom d'Examen: Juniper (JN0-330-Enhanced Services, Specialist(JNCIS-ES))
Questions et réponses: 150 Q&As

Le test Juniper JN0-330 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.

Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Juniper JN0-330. Cet outil de formation est convenable pour les candidats de test Juniper JN0-330. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.

Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Juniper JN0-330. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.

JN0-330 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-330.html

NO.1 Which statement is true about interface-based static NAT?
A. It also supports PAT.
B. It requires you to configure address entries in the junos-nat zone.
C. It requires you to configure address entries in the junos-global zone.
D. The IP addresses being translated must be in the same subnet as the incoming interface.
Answer: D

Juniper examen   JN0-330 examen   JN0-330   JN0-330   certification JN0-330

NO.2 You must configure a SCREEN option that would protect your router from a session table flood.
Which configuration meets this requirement?
A. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
icmp {
ip-sweep threshold 5000;
flood threshold 2000;
}
B. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
tcp {
syn-flood {
attack-threshold 2000;
destination-threshold 2000;
}
C. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
udp {
flood threshold 5000;
}
D. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
limit-session {
source-ip-based 1200;
destination-ip-based 1200;
}
Answer: D

certification Juniper   certification JN0-330   JN0-330

NO.3 Click the Exhibit button.
Based on the configuration shown in the exhibit, what will happen to the traffic matching the security
policy?
A. The traffic is permitted through the myTunnel IPSec tunnel only on Tuesdays.
B. The traffic is permitted through the myTunnel IPSec tunnel daily, with the exception of Mondays.
C. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
7:00 am and 6:00 pm, and Thursdays between 7:00 am and 6:00 pm.
D. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
6:01 pm and 6:59 am, and Thursdays between 6:01 pm and 6:59 am.
Answer: C

Juniper   JN0-330   JN0-330 examen   JN0-330   JN0-330   certification JN0-330

NO.4 Which two are components of the enhanced services software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC

Juniper examen   JN0-330 examen   JN0-330

NO.5 Which parameters must you select when configuring operating system probes SCREEN options?
A. syn-fin, syn-flood, and tcp-no-frag
B. syn-fin, port-scan, and tcp-no-flag
C. syn-fin, fin-no-ack, and tcp-no-frag
D. syn-fin, syn-ack-ack-proxy, and tcp-no-frag
Answer: C

Juniper examen   JN0-330   JN0-330   certification JN0-330

NO.6 You want to enable SSH and Telnet access to the router's CLI. Under which configuration hierarchy
would you enable these protocols?
A. [edit system cli]
B. [edit security cli]
C. [edit system services]
D. [edit security services]
Answer: C

Juniper   JN0-330   JN0-330   JN0-330

NO.7 Which three parameters are configured in the IKE policy? (Choose three.)
A. mode
B. preshared key
C. external interface
D. security proposals
E. dead peer detection settings
Answer: ABD

Juniper   JN0-330   JN0-330

NO.8 Which command allows you to view the router's current priority for VRRP group 100 on interface
ge-0/0/1.0?
A. show vrrp
B. show vrrp group 100
C. show interfaces ge-0/0/1.0 vrrp group 100
D. show interfaces vrrp ge-0/0/1.0 group 100
Answer:A

Juniper   JN0-330 examen   certification JN0-330   certification JN0-330   certification JN0-330

NO.9 In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device?
A. This interface is a system-created interface.
B. This interface belongs to NODE0 of the cluster.
C. This interface belongs to NODE1 of the cluster.
D. This interface will not exist because J6350 routers have only six slots.
Answer: C

Juniper   JN0-330 examen   JN0-330   JN0-330 examen

NO.10 Which two statements regarding asymmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: BC

Juniper   JN0-330   JN0-330 examen   JN0-330

NO.11 Which three security concerns can be addressed by a tunnel mode IPSec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer:ACE

Juniper   JN0-330   JN0-330   certification JN0-330   JN0-330

NO.12 On which three traffic types does firewall pass-through authentication work? (Choose three.)
A. ping
B. FTP
C. Telnet
D. HTTP
E. HTTPS
Answer: BCD

Juniper   certification JN0-330   JN0-330 examen   JN0-330 examen

NO.13 You want to create a policy allowing traffic from any host in the Trust zone to hostb.example.com
(172.19.1.1) in the
Untrust zone. How do you do create this policy?
A. Specify the IP address (172.19.1.1/32) as the destination address in the policy.
B. Specify the DNS entry (hostb.example.com.) as the destination address in the policy.
C. Create an address book entry in the Trust zone for the 172.19.1.1/32 prefix and reference this entry in
the policy.
D. Create an address book entry in the Untrust zone for the 172.19.1.1/32 prefix and reference this entry
in the policy.
Answer: D

certification Juniper   certification JN0-330   certification JN0-330   JN0-330 examen   certification JN0-330   JN0-330

NO.14 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. network address translation
Answer: B

Juniper   JN0-330   JN0-330 examen   certification JN0-330   JN0-330 examen

NO.15 Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and
network mask
of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This
host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to
make the HTTP service on the host reachable from the Internet.
On which IP address and TCP port can Internet hosts reach the HTTP service?
A. IP address 10.10.10.1 and TCP port 8080
B. IP address 71.33.252.17 and TCP port 80
C. IP address 71.33.251.19 and TCP port 80
D. IP address 71.33.252.19 and TCP port 8080
Answer: D

Juniper   JN0-330   certification JN0-330

NO.16 In JUNOS software with enhanced services, which three packet elements are inspected to determine
if a session
already exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer:ACE

certification Juniper   JN0-330   JN0-330 examen

NO.17 A route-based VPN is required for which scenario?
A. when the remote VPN peer is behind a NAT device
B. when multiple networks need to be reached across the tunnel
C. when the remote VPN peer is a dialup or remote access client
D. when a dynamic routing protocol such as OSPF is required across the VPN
Answer: D

Juniper   certification JN0-330   certification JN0-330   JN0-330

NO.18 Using a policy with the policy-rematch flag enabled, what happens to the existing and new sessions
when you change the policy action from permit to deny?
A. The new sessions matching the policy are denied. The existing sessions are dropped.
B. The new sessions matching the policy are denied. The existing sessions, not being allowed to carry
any traffic, simply timeout.
C. The new sessions matching the policy might be allowed through if they match another policy. The
existing sessions are dropped.
D. The new sessions matching the policy are denied. The existing sessions continue until they are
completed or their timeout is reached.
Answer:A

Juniper   certification JN0-330   JN0-330 examen   JN0-330   JN0-330

NO.19 Click the Exhibit button.
host_a is in subnet_a and host_b is in subnet_b.
Given the configuration shown in the exhibit, which statement is true about traffic from host_a to host_b?
A. DNS traffic is denied.
B. Telnet traffic is denied.
C. SMTP traffic is denied.
D. Ping traffic is permitted.
Answer: B

certification Juniper   certification JN0-330   JN0-330

NO.20 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the router itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

certification Juniper   certification JN0-330   JN0-330   JN0-330   certification JN0-330   JN0-330 examen

NO.21 You are not able to telnet to the interface IP of your JUNOS software with enhanced services device
from a PC on the same subnet. What is causing the problem?
A. Telnet is not being permitted by self policy.
B. Telnet is not being permitted by security policy.
C. Telnet is not allowed because it is not considered secure.
D. Telnet is not enabled as a host-inbound service on the zone.
Answer: D

Juniper   JN0-330   JN0-330   JN0-330 examen

NO.22 Click the Exhibit button.
In the exhibit, what is the purpose of this OSPF configuration?
A. The router sends the file debugOSPF (containing hellos sent and LSA updates) to the syslog server.
B. The router traces both OSPF hellos sent and LSA updates, and stores the results in the debugOSPF
file.
C. The router traces both OSPF hellos sent and LSA updates, and sends the results to the syslog process
with the debugOSPF facility.
D. The router traces all OSPF operations, stores the results in the debugOSPF file, and marks both hellos
sent and LSAupdates in the file with a special flag.
Answer: B

certification Juniper   JN0-330   JN0-330   JN0-330   JN0-330

NO.23 Click the Exhibit button.
In the exhibit, which statement is correct?
A. Three physical interfaces are redundant.
B. You must define an additional Redundancy Group.
C. node 0 will immediately become primary in the cluster.
D. You must issue an operational command and reboot the system for the above configuration to take
effect.
Answer: D

Juniper   JN0-330   JN0-330 examen   JN0-330

NO.24 Click the Exhibit button.
In the exhibit, what is the priority for Router B in VRRP group 100?
A. 1
B. 100
C. 110
D. 255
Answer: B

Juniper examen   JN0-330   JN0-330   JN0-330   JN0-330

NO.25 Which two are components of the JUNOS software's routing policy? (Choose two.)
A. route-map
B. prefix-list
C. distribute-list
D. policy-statement
Answer: BD

Juniper   JN0-330   certification JN0-330   JN0-330

NO.26 Click the Exhibit button.
Based on the exhibit, client PC 192.168.10.10 cannot ping 1.1.1.2.
Which is a potential cause for this problem?
A. The untrust zone does not have a management policy configured.
B. The trust zone does not have ping enabled as host-inbound-traffic service.
C. The security policy from the trust zone to the untrust zone does not permit ping.
D. No security policy exists for the ICMP reply packet from the untrust zone to the trust zone.
Answer: C

certification Juniper   JN0-330   certification JN0-330

NO.27 Click the Exhibit button.
Which type of source NAT is configured in the exhibit?
A. static source pool
B. interface source pool
C. source pool with PAT
D. souce pool without PAT
Answer:A

Juniper   JN0-330   JN0-330

NO.28 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections. How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D

Juniper   JN0-330   JN0-330

NO.29 Which two are characteristics of link-state routing protocols? (Choose two.)
A. Routers choose a best path for a destination based on the SPF algorithm.
B. All routers in a given area or level build a consistent database describing the network's topology.
C. Routers choose the best path for a destination based on the interface on which they received the link
stateadvertisement with the lowest cost.
D. All routers in a given area or level forward link state advertisements between interfaces in the same
area or level,
adding their metric to the link state advertisement's cost information when they forward it.
Answer:AB

Juniper examen   JN0-330 examen   JN0-330   certification JN0-330

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Juniper JN0-332, de formation et d'essai

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Juniper JN0-332 est bien autorisé. Avec le certificat Juniper JN0-332, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Juniper JN0-332.

Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification Juniper JN0-332. Il n'y a pas de soucis à réussir le test avec une haute note.

Code d'Examen: JN0-332
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC))
Questions et réponses: 406 Q&As

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Juniper JN0-332, la voie à la réussite de votre professionnel sera ouverte pour vous.

JN0-332 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-332.html

NO.1 Which two statements regarding external authentication servers for firewall user authentication are
true? (Choose two.)
A. Up to three external authentication server types can be used simultaneously.
B. Only one external authentication server type can be used simultaneously.
C. If the local password database is not configured in the authentication order, and the configured
authentication server is unreachable, authentication is bypassed.
D. If the local password database is not configured in the authentication order, and the configured
authentication server rejects the authentication request, authentication is rejected.
Answer: B,D

Juniper   JN0-332   certification JN0-332

NO.2 Which security or functional zone name has special significance to the Junos OS?
A. self
B. trust
C. untrust
D. junos-global
Answer: D

certification Juniper   JN0-332 examen   JN0-332   JN0-332   JN0-332

NO.3 Which two statements are true about hierarchical architecture? (Choose two.)
A. You can assign a logical interface to multiple zones.
B. You cannot assign a logical interface to multiple zones.
C. You can assign a logical interface to multiple routing instances.
D. You cannot assign a logical interface to multiple routing instances.
Answer: B,D

Juniper   certification JN0-332   JN0-332   JN0-332

NO.4 Which zone is system-defined?
A. security
B. functional
C. junos-global
D. management
Answer: C

certification Juniper   JN0-332 examen   JN0-332   certification JN0-332

NO.5 Which three security concerns can be addressed by a tunnel mode IPsec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer: A,C,E

Juniper   JN0-332   JN0-332 examen   JN0-332   certification JN0-332

NO.6 Which three statements are true regarding IDP? (Choose three.)
A. IDP cannot be used in conjunction with other Junos security features such as SCREEN options, zones,
and security policy.
B. IDP inspects traffic up to the Application Layer.
C. IDP searches the data stream for specific attack patterns.
D. IDP inspects traffic up to the Presentation Layer.
E. IDP can drop packets, close sessions, prevent future sessions, and log attacks for review by network
administrators when an attack is detected.
Answer: B,C,E

Juniper   JN0-332 examen   certification JN0-332   certification JN0-332   certification JN0-332   JN0-332

NO.7 Regarding content filtering, what are two pattern lists that can be configured in the Junos OS? (Choose
two.)
A. protocol list
B. MIME
C. block list
D. extension
Answer: B,D

Juniper   certification JN0-332   certification JN0-332

NO.8 Which statement contains the correct parameters for a route-based IPsec VPN?
A. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
B. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
C. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
D. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
Answer: D

Juniper   JN0-332   JN0-332 examen   JN0-332

NO.9 Which type of Web filtering by default builds a cache of server actions associated with each URL it has
checked?
A. Websense Redirect Web filtering
B. integrated Web filtering
C. local Web filtering
D. enhanced Web filtering
Answer: B

Juniper examen   JN0-332   JN0-332   JN0-332

NO.10 You want to allow your device to establish OSPF adjacencies with a neighboring device connected to
interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration
hierarchy must you permit OSPF traffic?
A. [edit security policies from-zone HR to-zone HR]
B. [edit security zones functional-zone management protocols]
C. [edit security zones protocol-zone HR host-inbound-traffic]
D. [edit security zones security-zone HR host-inbound-traffic protocols]
Answer: D

certification Juniper   JN0-332   certification JN0-332   JN0-332

NO.11 Click the Exhibit button.
System services SSH, Telnet, FTP, and HTTP are enabled on the SRX Series device.
Referring to the configuration shown in the exhibit, which two statements are true? (Choose two.)
A. A user can use SSH to interface ge-0/0/0.0 and ge-0/0/1.0.
B. A user can use FTP to interface ge-0/0/0.0 and ge-0/0/1.0.
C. A user can use SSH to interface ge-0/0/0.0.
D. A user can use SSH to interface ge-0/0/1.0.
Answer: B,C

Juniper examen   JN0-332   JN0-332   JN0-332   certification JN0-332

NO.12 Click the Exhibit button.
In the exhibit, a new policy named DenyTelnet was created. You notice that Telnet traffic is still allowed.
Which statement will allow you to rearrange the policies for the DenyTelnet policy to be evaluated before
your Allow policy?
A. insert security policies from-zone A to-zone B policy DenyTelnet before policy Allow
B. set security policies from-zone B to-zone A policy DenyTelnet before policy Allow
C. insert security policies from-zone A to-zone B policy DenyTelnet after policy Allow
D. set security policies from-zone B to-zone A policy Allow after policy DenyTelnet
Answer: A

Juniper   JN0-332   JN0-332   certification JN0-332

NO.13 A user wants to establish an HTTP session to a server behind an SRX device but is being pointed to
Web page on the SRX device for additional authentication.Which type of user authentication is
configured?
A. pass-through with Web redirect
B. WebAuth with HTTP redirect
C. WebAuth
D. pass-through
Answer: A

certification Juniper   JN0-332   JN0-332 examen   JN0-332 examen   certification JN0-332   JN0-332

NO.14 Click the Exhibit button.
Your IKE SAs are up, but the IPsec SAs are not up.Referring to the exhibit, what is the problem?
A. One or more of the phase 2 proposals such as authentication algorithm, encryption algorithm do not
match.
B. The tunnel interface is down.
C. The proxy IDs do not match.
D. The IKE proposals do not match the IPsec proposals.
Answer: C

Juniper   JN0-332   certification JN0-332   JN0-332 examen   JN0-332

NO.15 Which configuration keyword ensures that all in-progress sessions are re-evaluated upon committing a
security policy change?
A. policy-rematch
B. policy-evaluate
C. rematch-policy
D. evaluate-policy
Answer: A

Juniper   JN0-332   JN0-332 examen

NO.16 You must configure a SCREEN option that would protect your router from a session table flood.Which
configuration meets this requirement?
A. [edit security screen]
user@host# show
ids-option protectFromFlood
{
icmp
{
ip-sweep threshold 5000;
flood threshold 2000;
}
}
B. [edit security screen]
user@host# show
ids-option protectFromFlood
{
tcp
{
syn-flood
{
attack-threshold 2000;
destination-threshold 2000;
}
}
}
C. [edit security screen]
user@host# show
ids-option protectFromFlood
{
udp
{
flood threshold 5000;
}
}
D. [edit security screen]
user@host# show
ids-option protectFromFlood
{
limit-session
{
source-ip-based 1200;
destination-ip-based 1200;
}
}
Answer: D

Juniper   JN0-332 examen   JN0-332   certification JN0-332

NO.17 Click the Exhibit button.
You need to alter the security policy shown in the exhibit to send matching traffic to an IPsec VPN tunnel.
Which command causes traffic to be sent through an IPsec VPN named remote-vpn.?
A. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel remote-vpn
B. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel ipsec-vpn remote-vpn
C. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit ipsec-vpn remote-vpn
D. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit tunnel ipsec-vpn remote-vpn
Answer: D

Juniper examen   JN0-332 examen   JN0-332   JN0-332   certification JN0-332   JN0-332 examen

NO.18 Which UTM feature requires a license to function?
A. integrated Web filtering
B. local Web filtering
C. redirect Web filtering
D. content filtering
Answer: A

certification Juniper   JN0-332   certification JN0-332   certification JN0-332

NO.19 Which command do you use to display the status of an antivirus database update?
A. show security utm anti-virus status
B. show security anti-virus database status
C. show security utm anti-virus database
D. show security utm anti-virus update
Answer: A

Juniper   certification JN0-332   JN0-332   JN0-332   JN0-332 examen

NO.20 Which two statements regarding symmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: A,D

certification Juniper   certification JN0-332   certification JN0-332   JN0-332

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Juniper JN0-332 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.