Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Symantec 250-511, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Symantec 250-511, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Symantec 250-511. Peut-être d'obtenir le Certificat Symantec 250-511 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification Symantec 250-511, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.
Code d'Examen: 250-511
Nom d'Examen: Symantec (Administration of Symantec(TM) Data Loss Prevention 11)
Questions et réponses: 176 Q&As
250-511 Démo gratuit à télécharger: http://www.pass4test.fr/250-511.html
NO.1 After installing several new DLP Agents, the Data Loss Prevention administrator discovers that none of
the endpoint agents are appearing on the Agent Overview page. After refreshing the page several times,
and determining that the equipment is powered on and connected to the network, the Agent Overview
page still fails to display the new agents. What is a possible cause for this issue?
A. The DLP Agents need to be added manually through the Symantec Management Platform.
B. The DLP Agents were installed with the incorrect Endpoint server IP address.
C. The assigned Endpoint server needs to be recycled in order to detect the new DLP Agents.
D. The Endpoint Location is set to "Manually" instead of "Automatically" in the Enforce user interface.
Answer: B
certification Symantec 250-511 examen 250-511
NO.2 What must a policy manager do when working with Exact Data Matching (EDM) indexes?
A. re-index large data sources on a daily or weekly basis
B. index the original data source on the detection server
C. deploy the index only to specific detection servers
D. create a new data profile if data source schema changes
Answer: D
Symantec examen 250-511 250-511
NO.3 What is a feature of keyword proximity matching?
A. It will match on whole keywords only.
B. It has a maximum distance between keywords of 99.
C. It only matches on message body.
D. It evaluates each keyword pair independently.
Answer: D
certification Symantec 250-511 250-511 examen 250-511 examen
NO.4 What are two benefits of the Symantec Data Loss Prevention 11 security architecture? (Select two.)
A. Communication is initiated by the detection servers inside the firewall.
B. SSL communication is used for user access to the Enforce Platform.
C. Endpoint Agent to Endpoint Server communication uses the Triple Data Encryption Standard (Triple
DES).
D. Confidential information captured by system components is stored using Advanced Encryption
Standards (AES) symmetric keys.
E. All indexed data uploaded into the Enforce Platform is protected with a two-way hash.
Answer: B,D
Symantec certification 250-511 250-511 examen 250-511
NO.5 Which Network Discover option is used to determine whether confidential data exists without having to
scan the entire target?
A. Byte Throttling
B. File Throttling
C. Match Thresholds
D. Inventory Mode Scanning
Answer: D
Symantec certification 250-511 250-511 examen
NO.6 Which two functions of the communications architecture ensure that the system will automatically
recover if a network connectivity failure occurs between the detection servers and the Enforce Server?
(Select two.)
A. Oracle database backup
B. detection server autonomous monitoring
C. Enforce Server offline alert notification
D. detection server incident queuing
E. detection server alert archiving
Answer: B,D
Symantec examen 250-511 certification 250-511 certification 250-511
NO.7 A user is unable to log in as sysadmin. The Data Loss Prevention system is configured to use Active
Directory authentication. The user is a member of two roles, sysadmin and remediator. How should the
user log in to the user interface in the sysadmin role?
A. sysadmin\username@domain
B. sysadmin\username
C. domain\username
D. sysadmin\username\domain
Answer: B
Symantec examen 250-511 examen 250-511 250-511 examen 250-511
NO.8 A company needs to scan all of its file shares on a weekly basis to make sure sensitive data is being
stored correctly. The total volume of data on the file servers is greater than 1 TB. Which approach will
allow the company to quickly scan all of this data on a weekly basis?
A. run an initial complete scan of all the file shares, then modify the scan target to add date filters and
exclude any files created or modified before the initial scan was run
B. run an initial complete scan of all the file shares, then modify the scan target to an incremental scan
type
C. create a separate scan target for each file share and exclude files accessed before the start of each
scan
D. run an initial complete scan of all file shares, create a summary report of all incidents created by the
scan, then run weekly scans and compare incidents from weekly scans to incidents from the complete
scan
Answer: B
Symantec 250-511 examen 250-511 250-511 examen
NO.9 An administrator is running a Discover Scanner target scan and the scanner is unable to communicate
back to the Discover Server. Where will the files be stored?
A. Discover Server incoming folder
B. scanner's outgoing folder
C. scanner's incoming folder
D. Enforce incident persister
Answer: B
certification Symantec 250-511 examen certification 250-511 certification 250-511 250-511
NO.10 Which two policy management actions can result in a reduced number of incidents for a given traffic
flow? (Select two.)
A. adding additional component matching to the rule
B. adding data owner exceptions
C. deploying to additional detection servers
D. increasing condition match count
E. adding additional severities
Answer: B,D
certification Symantec 250-511 250-511 certification 250-511 250-511
NO.11 Where should the Network Discover detection server be placed in a corporate network architecture?
A. inside the DMZ
B. on the same virtual LAN as the proxy server
C. inside the corporate network
D. on the same switch as the Oracle database server
Answer: C
Symantec 250-511 250-511
NO.12 Which DLP Agent task is unique to the Symantec Management Platform and is unavailable through
the Enforce console?
A. Change Endpoint server
B. Restart agent
C. Pull agent logs
D. Set log level
Answer: D
Symantec certification 250-511 250-511 250-511 250-511
NO.13 Which two remediation actions are available for Network Protect? (Select two.)
A. Copy
B. Move
C. Block
D. Rename
E. Quarantine
Answer: A,E
Symantec 250-511 examen 250-511 250-511 certification 250-511
NO.14 How can an administrator validate that once a policy is updated and saved it has been enabled on a
specific detection server?
A. check the status of the policy on the policy list page
B. check to see whether the policy was loaded under System > Servers > Alerts
C. check the policy and validate the date and time it was last updated
D. check to see whether the policy was loaded under System > Servers > Events
Answer: D
Symantec certification 250-511 250-511 examen
NO.15 A divisional executive requests a report of all incidents generated by a particular region, summarized
by department. What must be populated to generate this report?
A. remediation attributes
B. sender correlations
C. status groups
D. custom attributes
Answer: D
certification Symantec 250-511 examen 250-511
NO.16 Which product provides support for the Citrix XenApp virtualization platform?
A. Endpoint Prevent
B. Network Discover
C. Network Protect
D. Network Prevent
Answer: A
Symantec examen 250-511 examen 250-511
NO.17 A Data Loss Prevention administrator notices that several errors occurred during a Network Discover
scan. Which report can the administrator use to determine exactly which errors occurred and when?
A. Discover Incident report sorted by target name and scan
B. Full Activity report for that particular scan
C. Server Event report from Server Overview
D. Full Statistics report for that particular scan
Answer: B
Symantec examen 250-511 examen 250-511 examen certification 250-511 certification 250-511
NO.18 A role is configured for XML export and a user executes the export XML incident action. What must be
done before history information is included in the export?
A. A remediator must take an action on the incident.
B. History must be enabled as a tab or panel in the incident snapshot layout.
C. Incident history must be enabled in the user's role.
D. The manager.properties must be configured for XML export.
Answer: C
Symantec 250-511 250-511 250-511 examen
NO.19 To manually troubleshoot DLP Agent issues, the database and log viewer tools must be executed in
which location?
A. in the same location as the dcs.ead file location
B. in the same location as the cg.ead file location
C. in the same location as the ks.ead file location
D. in the same location as the is.ead file location
Answer: C
Symantec examen 250-511 examen certification 250-511 250-511 examen 250-511
NO.20 The database is full and the Incident Persister is unable to process incidents. Which two file types
could be present in Vontu/protect/incidents? (Select two.)
A. .idx
B. .edc
C. .idc
D. .inc
E. .bad
Answer: C,E
certification Symantec 250-511 certification 250-511 250-511 examen
Si vous voulez ne se soucier plus à passer le test Symantec 250-511, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Symantec 250-511. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Symantec 250-511 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
没有评论:
发表评论