Un bon choix de l'outil à se former est le point essentiel à passer le test CWNP PW0-250, et les documentations à propos de rechercher le test CWNP PW0-250 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test CWNP PW0-250 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
Code d'Examen: PW0-250
Nom d'Examen: CWNP (Certified Wireless Design Professional (CWDP) )
Questions et réponses: 60 Q&As
Vous aurez une assurance 100% à réussir le test CWNP PW0-250 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test CWNP PW0-250 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.
Si vous traviallez dur encore pour préparer le test de CWNP PW0-250 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test CWNP PW0-250.
Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test CWNP PW0-250. La ressourece providée par Pass4Test peut juste s'accorder votre demande.
Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test CWNP PW0-250 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification CWNP PW0-250.
PW0-250 Démo gratuit à télécharger: http://www.pass4test.fr/PW0-250.html
NO.1 After surveying for the ideal mounting locations for APs, you have been asked to compromise RF
propagation optimization due to aesthetic concerns raised by your customer. In the end, you ve decided to
mount the APs in the ideal locations and paint the APs so they go unnoticed in the environment.
What is a valid recommendation or consideration when painting APs? (Choose 2)
A. Always use paints with metallic dye in them to prevent potential RF propagation impact.
B. Do not paint the notification LEDs on the AP, but configure them to be dim or turned off altogether until
troubleshooting is required.
C. Painting APs may void the product manufacturer s warranty.
D. Most AP models for indoor environments come in a variety of form factors and colors. Painting is never
recommended.
E. Painting APs always introduces a fire and gas emissions hazard and should be avoided for all indoor
APs.
Answer: B,C
CWNP PW0-250 examen PW0-250 examen PW0-250 examen
NO.2 In a manufacturing facility with highly reflective materials, you are planning an upgrade to your existing
802.11b solution. You have chosen a dual-band 802.11n infrastructure product for this purpose. Your
client applications include:
Handheld scanners
for inventory management
Toughbooks (laptops)
mounted on forklifts for inventory and workflow management
VoWiFi phones
used by select employees throughout the facility You are evaluating all of the 802.11n
enhancements and determining which features to enable for your environment and applications.
In this scenario, what 802.11n enhancements should NOT be enabled on the 2.4 GHz radio of the new
APs? (Choose 2)
A. 40 MHz channels
B. Short guard intervals
C. Block Acknowledgments
D. Frame aggregation
E. MRC
F. STBC
Answer: A,B
certification CWNP PW0-250 examen PW0-250 examen
NO.3 When deploying long-distance 802.11 bridge links (10 miles / 16 km), what parameter may be critical for
improving data flow by reducing retries caused by the long distances.?
A. The sequence control field value
B. The acknowledgement timeout threshold
C. The minimum transmit data rate value
D. The CTS-to-self threshold
E. The Beacon interval
F. The PHY parameter set field
Answer: B
CWNP PW0-250 examen PW0-250 certification PW0-250
NO.4 Which definition correctly describes the local MAC
variation of the centralized WLAN architecture?
A. All MAC functions are performed by the AP. A minimal subset of network control is offloaded to the
WLAN controller along with management and monitoring functions.
B. PHY functions are performed directly by the AP. MAC functions are divided almost equally between the
WLAN controller and the AP, according to the time sensitivity of the feature or service.
C. The AP provides the RF termination point for the WLAN, but performs very few of the WLAN functions
or services. The WLAN controller performs all MAC functions and the AP is very simple and lightweight.
D. All RF-, data-, and control-related WLAN functions are performed by the AP. APs coordinate network
services with one another and are managed by a WNMS, so no WLAN controller is used in this
architecture.
Answer: A
CWNP examen PW0-250 PW0-250 examen
NO.5 In a centralized WLAN architecture, what new problem may arise when you change the data forwarding
model from centralized to distributed? (Choose 2)
A. APs that were designed for a centralized forwarding model may not support all features in distributed
forwarding mode.
B. The Ethernet switch ports to which APs are connected may need to be reconfigured to support VLAN
tagging and QoS at the network edge.
C. All RRM controls will also need to be distributed to a master AP that acts as a channel and transmit
power arbiter for other APs in the ESS.
D. Centralized control functions, such as key management and distribution, RRM, and load balancing will
no longer be supported.
E. APs will not have the processing capabilities to support AES-CCMP, so TKIP will be the recommended
encryption method.
Answer: A,B
certification CWNP PW0-250 examen PW0-250 examen PW0-250 PW0-250
NO.6 Your customer location is equipped with DAS, originally deployed to relay a GSM signal indoors and
provide 802.11 data coverage to static stations. What type of wireless application would be least likely to
be supported by this RF distribution model?
A. On-demand video streaming over wireless
B. Data connection with frequent roaming
C. Location-based services for wireless assets or RFID tags
D. VoWLAN if the codec is G.729.
E. FTP over implicit TLS/SSL
Answer: C
CWNP certification PW0-250 PW0-250 examen PW0-250 PW0-250 examen certification PW0-250
NO.7 According to WLAN security design best practices, what is true of the EAP properties shown in the
exhibit?
A. The Validate server certificate
checkbox should be checked if you purchased a third-party SSL
certificate for the AS, but left unchecked if you have a self-signed certificate for the AS.
B. The Validate server certificate
checkbox should always be checked to prevent MITM attacks from
rogue authentication servers.
C. The Trusted Root Certification Authorities
list is provided to identify the certificate that the client
should send to the AS for client authentication.
D. The Do not prompt user to authorize new servers or trusted certification authorities
box should be
checked only for administrative users.
E. The Enable Identity Privacy
checkbox and anonymous name field are only useful for networks
supporting EAP-LEAP.
Answer: B
CWNP PW0-250 PW0-250 PW0-250 examen
NO.8 Given: Use Exhibit 1, 2, and 3 to answer the question.
The azimuth and elevation charts for which type of antenna are shown in Exhibit 1?
A. Figure 1
B. Figure 2
C. Figure 3
D. Figure 4
E. Figure 5
F. Figure 6
Answer: C
CWNP examen certification PW0-250 PW0-250
NO.9 One of your customers plans on providing wireless coverage to a warehouse facility. After performing an
initial walkthrough, you collect the following information:
-The central part of the warehouse is between 400 and 600 feet (122 to 183 meters) from the warehouse
switches mounted on the walls.
-The warehouse map was provided by the customer and is displayed in the exhibit.
-The warehouse storage is composed of metallic racks with varying inventory levels and contents, from
electronics and plastic toys to food pallets and juice bottles.
-Workers need basic data coverage from their working location, and are not highly mobile. They usually
work from one single aisle, and their laptop is on a cart with wheels.
What would be your recommendation to provide coverage to the central area (indicated by a blue circle)
of the warehouse?
A. Equip workers laptops with a directional antenna and install APs less than 328 feet (100m) away from
the switch.
B. In this case, extend the cable length just beyond 328 feet (100 m) and position APs as close as
possible to the central area of the warehouse.
C. Position APs along the walls, and equip the APs with Yagi antennas to cover the central area.
D. Install APs for client access in the central area and use a mesh backhaul link to connect to the DS.
Answer: D
certification CWNP PW0-250 PW0-250 PW0-250 PW0-250 examen
NO.10 When a WLAN controller transmits an Ethernet frame that has an IEEE 802.11 frame as its payload to a
lightweight AP, what type of QoS marks can be applied to the Ethernet frame and/or its payload? (Choose
3)
A. IEEE 802.1Q PCP marks in the Ethernet frame header
B. User Priority marks in the IEEE 802.11 frame header
C. Throughput subscription marks in the Ethernet frame header
D. MPLS tags from the Label Edge Router (LER)
E. DSCP marks to the ToS bits in the encapsulating IP packet header
F. RSVP tag if RTP is the payload of the IEEE 802.11 frame
Answer: A,B,E
CWNP PW0-250 PW0-250 examen PW0-250 examen
Le test CWNP PW0-250 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test CWNP PW0-250. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.
没有评论:
发表评论