Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat IBM 000-221. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test IBM 000-221. Choisir le produit de Pass4Test particulier pour le test Certification IBM 000-221 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat IBM 000-221 est bien autorisé. Avec le certificat IBM 000-221, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A IBM 000-221.
Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.
Code d'Examen: 000-221
Nom d'Examen: IBM (AIX 7 Administration )
Questions et réponses: 229 Q&As
L'importance de la position de Certificat IBM 000-221 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen IBM 000-221 par votre première fois.
Pass4Test vous promet de vous aider à passer le test IBM 000-221, vous pouvez télécharger maintenant les Q&As partielles de test IBM 000-221 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
000-221 Démo gratuit à télécharger: http://www.pass4test.fr/000-221.html
NO.1 How can an administrator disable Role Based Access Control (RBAC) in a WPAR?
A. Run chattr -E -I sys0 -a enhanced_RBAC=false Reboot the WPAR
B. Run the RBAC wizard and deselect 'Enable RBAC Reboot the system
C. Run chdev -I mywpar -a enhanced_RBAC=false Reboot the Global Environment
D. Run chwpar -a RBAC=false Reboot the WPAR
Answer: C
IBM 000-221 000-221 certification 000-221 000-221
NO.2 A host has a single virtual Ethernet adapter (ent0) configured with only a default PVID, and the
administrator is trying to determine why it cannot be used to reach any other system on the network. He
suspects that it may be caused by a problem in the VLAN configuration.
How would the administrator determine the VLAN for which the adapter was configured?
A. Use the command 'Isdev -I ent0' on the host to determine the port VLAN ID.
B. Use the command 'Isattr-EI ent0' on the host to determine the port VLAN ID.
C. Look on the HMC to determine which VLAN is configured for the adapter.
D. Examine the Shared Ethernet Adapter on the Virtual I/O Server to determine which VLAN the adapter
is using.
Answer: C
certification IBM 000-221 examen certification 000-221 000-221
NO.3 Which technology provides the maximum amount of usable storage and resilience for a system with 6
physical volumes?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
Answer: C
certification IBM 000-221 examen 000-221 000-221 examen 000-221 certification 000-221
NO.4 AIX has been installed on an LPAR with 32 GB of memory. What should be checked first, before
increasing the paging space beyond the default 512MB?
A. The maximum memory attribute in the LPAR profile.
B. Quantity and size of hosted filesystems.
C. Disk device distribution and utilization.
D. Paging requirements of applications that will be hosted.
Answer: D
IBM 000-221 000-221
NO.5 An administrator needs to list/query the security attributes for the WPAR syswpar1. Which command
will do this?
A. Issecattr-W syswpar1
B. Issecconf-w syswpar1
C. Isattr-s syswpar1
D. Iswpar-S syswpar1
Answer: D
IBM 000-221 000-221 examen
NO.6 What is the difference between deferred and concurrent firmware updates.?
A. Deferred firmware can be applied concurrently but contains updates that affect the internal program
load path, which are not activated until the next time the server is shut down and restarted.
B. Concurrent firmware must be done on all LPARs in the frame at the same time. Deferred firmware can
be loaded on each LPAR at a different time and only becomes active when the LPAR is shutdown and
restarted.
C. Deferred firmware can only be applied during an outage to the managed system as it will automatically
shut the managed system down during its installation.
D. Concurrent firmware is only for minor fixes to the system mircocode while deferred firmware contains
major fixes to the service processor.
Answer: A
IBM 000-221 000-221 000-221
NO.7 Which AIX command will display the virtual SCSI slot number that is the parent of hdisk0?
A. Isdev
B. Iscfg
C. Isattr
D. Ismap
Answer: B
IBM 000-221 certification 000-221 000-221
NO.8 What option will boot an LPAR directly from DVD media, without any user interaction required, when
starting the LPAR from the Hardware Management Console (HMC)?
A. Normal
B. Diagnostic with default boot list
C. System management services
D. Open firmware OK prompt
Answer: B
IBM 000-221 000-221 000-221 examen
NO.9 The cfgmgr command appears to be taking an excessive time to complete. The administrator was able
to quit the command and return to the command prompt. The administrator does not have access to the
managing HMC and unable to check for any LED codes.
How else can the cause of the observed delay be determined?
A. Review the latest entry within /var/log/cfgdb.out.
B. Start the syslog daemon before re-issuing the command.
C. Re-issue the command with the W flag.
D. Initiate the ledmon command from a separate session, then re-issue cfgmgr.
Answer: C
certification IBM 000-221 000-221 examen
NO.10 Which TWO groups of actions will create a CDROM file system for device cd0 and mount this on /cdfs?
(Select 2)
A. cdutil-s-kcd0/cdfs mount /cdfs
B. Define cd0 mount point as /cdfs in file /etc/cdromd.conf startsrc -s cdromd cdmount cd0
C. Define cd0 mount point as /cdfs in /etc/filesystems as vfs type jfs2 mount /cdfs
D. crfs-vcdrfs-pro-d'cd0'-mVcdfs' mount /cdfs
E. mkfs-v/cdfs/dev/cd0 mount /cdfs
Answer: B,D
IBM examen certification 000-221 000-221 000-221 000-221 examen
NO.11 What is a requirement for Live Partition Mobility?
A. The network and disk must be virtual.
B. The disk must be virtual and a Logical Host Ethernet Adapter (LHEA) for network.
C. The client partition must be connected to a SAN.
D. The client partition must be set up as a 'Mover Service Partition ¯:.
Answer: A
IBM 000-221 examen 000-221
NO.12 Which of the following is an AIX 7 Cluster Aware feature?
A. Cluster application load balancing
B. Cluster shared volume groups on the shared disk
C. Cluster IP addresses on the shared resource
D. Cluster configurations on the cluster repository disk
Answer: D
IBM certification 000-221 certification 000-221 000-221 000-221 examen
NO.13 New change control procedures dictate that system maintenance windows be shown to each user after
logging into the system using ssh or telnet. Updating which file or files will accomplish this task?
A. The message of the day file
B. The user default attributes file
C. User and admin system alert files
D. The var daily message files
Answer: A
IBM 000-221 000-221 000-221
NO.14 After performing a NIM rte install, the administrator noticed that not all filesets are at the correct
Technology Level (TL). What action will help the administrator determine why the inconsistent fileset
levels were installed?
A. On the NIM server, run an Ippchk to identify if the Software Vital Product Data is valid.
B. On the NIM client, run oslevel command against the TL to identify missing prerequisites.
C. Run instfix command on NIM client to determine what filesets are inconsistent.
D. On the NIM server run the NIM IsIpp command to indentify downlevel filesets contained in the
lpp_source.
Answer: D
certification IBM certification 000-221 000-221 000-221 000-221 examen 000-221
NO.15 The following information has been reported in an AIX error log:
How can the administrator prevent the error from reoccurring?
A. Create a secondary dump device greater than 266MB
B. Increase primary dump device size greater than 266MB
C. Increase /var" file system to ensure it has a minimum of 266MB free space
D. Increase "/var/adm/ras/livedump" file system to ensure it has a minimum of 266MB free space
Answer: C
IBM examen 000-221 000-221 000-221 000-221
NO.16 An administrator plans to duplicate the active rootvg on a given system to a spare disk that will be
migrated to newer hardware. Which flag on 'alt_disk_copy' must be used to reset user-defined device
configurations to defaults?
A. X
B. R
C. O
D. D
Answer: C
IBM certification 000-221 000-221 examen 000-221 certification 000-221 000-221 examen
NO.17 An LPAR is configured with strict logical volume mirroring across two disks for resilience. The
administrator would like to ensure if one disk fails the volume group stays online. Which command will
ensure that the datavg volume group stays online?
A. varyonvg -n datavg
B. mirrorvg-Q-c 2 datavg
C. mklvcopy -e m -s y (each logical volume name) 2
D. chvg -Qn datavg
Answer: D
IBM examen 000-221 000-221 examen certification 000-221 000-221
NO.18 How can an administrator enable the Workload Partitions Manager feature after AIX 7 has been
installed with the default options?
A. Change AIX License using chlicense -I command
B. Change AIX edition using chedition -e command
C. Change WPAR License using chwpar -I command
D. Change WPAR edition using chwpar-e command
Answer: B
IBM 000-221 000-221
NO.19 What are key considerations when planning for Live Application Mobility?
A. The WPAR is an Application WPAR and both global environments are at the same AIX level
B. That the WPAR is checkpointable and both global environments are on the same subnet
C. The NFS services are running and applications are stopped
D. The NFS services are running and there is an HMC attached to both managed systems
Answer: B
IBM certification 000-221 certification 000-221 000-221 examen
NO.20 Before changing virtual memory settings, how can an administrator check the valid range of values for
a tuning parameter?
A. Iscfg-T
B. Isattr-R
C. vmtune-l
D. vmo-L
Answer: D
IBM examen 000-221 certification 000-221 000-221 examen certification 000-221
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
没有评论:
发表评论