Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Alcatel-Lucent 4A0-101, et aussi une meilleure assurance du succès du test 4A0-101. Vous choisissez Pass4Test, vous choisissez le succès.
Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Alcatel-Lucent 4A0-101 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.
Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 4A0-101 est lequel très important dans les tests de Certification Alcatel-Lucent. Pour être qualifié de Alcatel-Lucent, on doit obtenir le passport de test Alcatel-Lucent 4A0-101.
Code d'Examen: 4A0-101
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Interior Routing Protocols and High Availability)
Questions et réponses: 177 Q&As
Un bon choix de l'outil à se former est le point essentiel à passer le test Alcatel-Lucent 4A0-101, et les documentations à propos de rechercher le test Alcatel-Lucent 4A0-101 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Alcatel-Lucent 4A0-101, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Alcatel-Lucent 4A0-101 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Alcatel-Lucent 4A0-101 sans aucune doute.
La Q&A de Pass4Test vise au test Certificat Alcatel-Lucent 4A0-101. L'outil de formation Alcatel-Lucent 4A0-101 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.
4A0-101 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-101.html
NO.1 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. How many
type 4 LSAs will be present in the network?
A. One.
B. One for each of the routers in area 0
C. One for each of the external routes exported by router R1.
D. Type 4 LSAs are not generated in this network topology.
Answer: D
certification Alcatel-Lucent 4A0-101 4A0-101
NO.2 Which of the following commands can be used to display the number of SPF computations that have
been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A
Alcatel-Lucent examen 4A0-101 examen 4A0-101 4A0-101
NO.3 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2 goes
down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of Hello
timeouts. At this point, both routers R1 and R2 re-compute their link state database and send updates to
their adjacent routers. Once the process is complete for all routers, the networks have converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At this
point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent
routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information. At this
point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent
routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link is
down. At this point, both routers R1 and R2 re-compute their link statedatabase and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A
Alcatel-Lucent 4A0-101 certification 4A0-101 4A0-101 examen
NO.4 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure router
static-route 10.2.3.0/24 next-hop 10.1.2.1" command. What is the correct traceroute command to test this
static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A
certification Alcatel-Lucent 4A0-101 4A0-101 4A0-101
NO.5 Click the exhibit button.
Routers R1 R2, and R3 are running a classful routing protocol between them. Assuming that router R1
advertises all directly connected networks, how will these networks be represented in router R3's routing
table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/24 and one entry for 10.1.2.0/24.
C. The networks will be represented with one entry of 10.0.0.0/8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/24 in router R3's route table.
Answer: C
Alcatel-Lucent 4A0-101 examen 4A0-101 examen 4A0-101
NO.6 When a router receives an IP packet, but does not find a match in the routing table for the destination IP
address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B
Alcatel-Lucent 4A0-101 examen 4A0-101 examen 4A0-101 certification 4A0-101
NO.7 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D
Alcatel-Lucent examen 4A0-101 4A0-101
NO.8 Which of the following statements regarding distance vectors protocols are true.?
(Choose two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted beyond the
immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant routers
and how they interconnect
Answer: A
Alcatel-Lucent 4A0-101 certification 4A0-101 4A0-101
NO.9 Which of the following statements apply to link state protocol behavior? Choose three answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C
Alcatel-Lucent 4A0-101 4A0-101
NO.10 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming that
there are no stub networks, which of the following statements regarding type 4 LSA generation is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA that
is flooded to area 2.
Answer: D
Alcatel-Lucent 4A0-101 4A0-101 examen certification 4A0-101
NO.11 Click the exhibit button.
The following command sequence is executed on router R2:
A:R2# configure router ospf router-id 10.10.10.99
A:R2# configure router router-id 10.10.10.66
On router R1, what router ID appears for router R2 directly after these commands are executed?
A. 10.10.10.99
B. 10.10.10.66
C. 10.10.10.2
D. 10.10.10.1
Answer: C
Alcatel-Lucent 4A0-101 certification 4A0-101 certification 4A0-101
NO.12 Which of the following conditions will prevent an OSPF adjacency from reaching the full state? Choose
three answers.
A. MTU mismatch
B. Incorrect subnet mask
C. System interface not included in OSPF
D. Area ID not the same
E. Different metric set on each end of the link
F. Router ID not defined
Answer: A,B,D
Alcatel-Lucent 4A0-101 4A0-101 4A0-101 4A0-101
NO.13 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B
Alcatel-Lucent 4A0-101 examen 4A0-101 4A0-101 examen 4A0-101 examen
NO.14 Click the exhibit button.
What can you deduce from the show command on router R6?
A. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment.
The DR for this segment would be the router with router ID 10.10.10.5.
B. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment;
however, this command does not indicate whether 10.10.10.3 or 10.10.10.5 is the DR or BDR.
C. The router R6 interface is in a multi-access segment. It is the BDR, which is why it is not adjacent to the
other routers.
D. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment.
The DR for this segment would be the router with router ID 10.10.10.3.
Answer: B
Alcatel-Lucent 4A0-101 4A0-101 4A0-101 certification 4A0-101
NO.15 What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B
certification Alcatel-Lucent 4A0-101 certification 4A0-101
NO.16 Static routing will be used in a network between a corporate head office, with many connected networks,
and a branch office, with one connection to the head office. Which of the following best describes the
likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more specific
static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office router will
have a default route.
Answer: D
Alcatel-Lucent examen 4A0-101 4A0-101 examen 4A0-101 certification 4A0-101
NO.17 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach the
network behind router R2?
A. configure router static-route 139.120.121.0/24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2/24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/24 next-hop 139.120.121.2
Answer: A
certification Alcatel-Lucent certification 4A0-101 4A0-101 examen 4A0-101 examen 4A0-101 examen
NO.18 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B
Alcatel-Lucent 4A0-101 4A0-101 examen 4A0-101
NO.19 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D
Alcatel-Lucent certification 4A0-101 4A0-101 examen 4A0-101 certification 4A0-101
NO.20 Click the exhibit button.
A static route is created on router R1 using the "static-route 0.0.0.0/0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C
Alcatel-Lucent examen 4A0-101 certification 4A0-101 certification 4A0-101 certification 4A0-101
Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Alcatel-Lucent 4A0-101 juste avec la Q&A de Alcatel-Lucent 4A0-101 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.
没有评论:
发表评论