Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test IBM 000-732 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.
Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test IBM 000-732 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A IBM 000-732 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test IBM 000-732 plus facilement avec la Q&A de Pass4Test.
L'équipe de Pass4Test rehcerche la Q&A de test certification IBM 000-732 en visant le test IBM 000-732. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test IBM 000-732 sans aucune doute.
Le Certificat de IBM 000-732 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification IBM 000-732, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 000-732 sans aucun éffort, en même temps, le test de IBM 000-732 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test IBM 000-732 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
Vous allez choisir Pass4Test après essayer une partie de Q&A IBM 000-732 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification IBM 000-732.
Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test IBM 000-732 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test IBM 000-732, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.
Code d'Examen: 000-732
Nom d'Examen: IBM (DB2 9 for z/OS Database Administrator)
Questions et réponses: 148 Q&As
000-732 Démo gratuit à télécharger: http://www.pass4test.fr/000-732.html
NO.1 Which of the following RACF profiles would be used to allow IMS to access DB2 DSN1?
A.DSN1.IMS
B.DSNR.IMS
C.DSN1.MASS
D.DSN1.SASS
Correct:C
certification IBM 000-732 examen 000-732
NO.2 Which statement best describes how multi-row fetch improves performance?
A.It reduces the amount of programming required.
B.It reduces the number of SQL statements issued.
C.It reduces the amount of data sent over a network.
D.It reduces the amount of I/O required to read a table.
Correct:B
certification IBM 000-732 examen 000-732
NO.3 Given the following RUNSTATS utility statement: RUNSTATS TABLESPACE
DB2CERTDB.MYTBLSPC1 TABLE (MYTABLE1) COLUMN(ALL) INDEX REPORT YES UPDATE ALL
HISTORY ALL which of the following statements is true?
A.Cardinality statistics will only be collected on all columns of all indexes on table MYTABLE1.
B.Cardinality statistics will only be collected on the first column of each index on table MYTABLE1.
C.Cardinality statistics will only be collected on all columns of each index associated with table space
MYTBLSPC1.
D.Cardinality statistics will only be collected on the first column of each index associated with table space
MYTBLSPC1.
Correct:D
certification IBM 000-732 examen 000-732
NO.4 A company uses TRUSTED CONTEXT "ERP1" and ROLE "ERP_ROLE" as a security mechanism
to limit security exposure for an application. All the DB2 objects (databases, table spaces, tables,
indexes, views, plans and packages) have been created by that ROLE. The ROLE "ERP_ROLE"
has been assigned to User ID "DBA01" in order to perform DBA related tasks. When the user
"DBA01" leaves the company, the authorization ID is removed. Which of the following statements
are correct? (Select two answers)
A.None of these DB2 objects need to be recreated to re-grant the privileges.
B.The related plans and packages have to be recreated and the privileges re-granted.
C.When removing user "DBA01" privileges, none of these DB2 objects need to be dropped.
D.Only the related databases, table spaces, tables, indexes and views need to be recreated and the
privileges re-granted.
E.To remove the privileges of user "DBA01" on these related plans and packages, they have to be
dropped and as a result all associated privileges are revoked.
Correct:A C
certification IBM 000-732 examen 000-732
NO.5 A DBA has been required by a new company policy to implement a new DB2 security method.
The company would like to separate the authorization IDs that can execute plans and packages
from the authorization IDs that can create new plans and packages. Which of the following explicit
system privileges allows the user to create new plans and packages without being able to also
execute them?
A.BINDADD
B.CREATEIN
C.BINDAGENT
D.CREATEDBA
Correct:C
certification IBM 000-732 examen 000-732
NO.6 A DB2 V9 system that is in New Function Mode:
A.cannot fall back.
B.can fall back to Compatibility Mode.
C.can fall back to New Function Mode*.
D.can fall back to Compatibility Mode*.
Correct:D
certification IBM 000-732 examen 000-732
NO.7 Which parameter in WLM Application Environment controls the # of concurrent stored
procedures that can run in that particular environment?
A.NUMSRB
B.NUMTHR
C.NUMCTK
D.NUMTCB
Correct:D
certification IBM 000-732 examen 000-732
NO.8 A DBA wishes to audit all access to the non-audited table OWNER.EMPLOYEE. Assuming no
audit traces are started, which of the following steps are needed to audit access to this table?
A.-START TRACE AUDIT CLASS (5)
B.-START TRACE AUDIT CLASS (4, 5)
C.-START TRACE AUDIT CLASS (4, 5) and ALTER TABLE OWNER.EMPLOYEE AUDIT ALL
D.-START TRACE AUDIT CLASS (4, 5) and ALTER TABLE OWNER.EMPLOYEE DATA CAPTURE
CHANGES
Correct:C
certification IBM 000-732 examen 000-732
NO.9 A DBA was examining the Log Statistics, Log Activity section in the OMEGAMON Performance
Expert Tool and noticed a large value in the field UNAVAILABLE OUTPUT LOG BUFF. This is an
important and critical performance metric. What does this performance metric mean?
A.The OUTPUT BUFFER field of installation panel DSNTIPL was specified too large so memory was not
utilized and wasted.
B.The active logs were not stripped by DFSMS and the active log data sets have to be processed
sequentially so many times.
C.The active log data sets were not placed on different volumes to reduce contention so a large amount of
I/O activity showed up in the OUTPUT BUFFER field.
D.The OUTPUT BUFFER field of installation panel DSNTIPL was specified too small so application has to
wait while DB2 was busy writing the Active log data sets.
Correct:D
certification IBM 000-732 examen 000-732
NO.10 If an object is created statically by a role within a trusted context and the ROLE AS OBJECT
OWNER clause is specified, who becomes the object owner when executing the package?
A.The role
B.The schema name
C.The owner keyword
D.The current SQLID (if set)
Correct:A
certification IBM 000-732 examen 000-732
NO.11 There are dynamic SQL statements running in a subsystem that need to have their host
variables reoptimized at run-time, however the distribution of the values does not change very
much between execution. What is the most optimal bind parameter for these statements?
A.REOPT(NONE)
B.REOPT(ONCE)
C.REOPT(VARS)
D.REOPT(ALWAYS)
Correct:B
certification IBM 000-732 examen 000-732
NO.12 A DBA needs to use the DSN command processor to delete DB2 packages that are no longer
needed. Which of the following choices is correct for the DBA to use?
A.SPUFI or QMF with the DROP statement
B.FREE Package (..)
C.DROP Package (..)
D.DROP PLAN () PKLIST (..)
Correct:B
certification IBM 000-732 examen 000-732
NO.13 What is the purpose of the following catalog health query? SELECT BNAME, BCREATOR,
BTYPE, DNAME FROM SYSIBM.SYSPLANDEP PD WHERE BTYPE IN ('T', 'V', 'A') AND NOT EXISTS
(SELECT * FROM SYSIBM.SYSTABLES WHERE CREATOR = PD.BCREATOR AND NAME =
PD.BNAME AND TYPE = PD.BTYPE);
A.For every row in SYSTABLES that indicates a dependency upon a table, view, or alias, there should be
a corresponding row in SYSPLANDEP.
B.For every row in SYSPLANDEP that indicates a dependency upon a table, view, or alias, there should
be a corresponding row in SYSTABLES.
C.For every row in SYSPLANDEP that indicates a dependency upon a table space, view, or a table that
has been altered, there should be a corresponding row in SYSTABLES.
D.For every row in SYSPLANDEP that indicates a dependency upon a table space, a table with a
VARCHAR column, or alias, there should be a corresponding row in SYSTABLES.
Correct:B
certification IBM 000-732 examen 000-732
NO.14 An end-user indicates that the DRDA client application accessing DB2 for z/OS is very slow.
However, other local applications accessing the same tables are running fine. What would
indicate that this could be a DB2 problem?
A.Calculate the non-nested CLASS 1 CPU time minus non-nested CLASS 2 CPU time. If the value is high,
it suggests a problem in the DDF address space.
B.Investigate the CLASS 3 suspension time. As class 3 time includes the time that DB2 spends
sending/receiving network messages, a high value is a possible indication that the network is
experiencing a slow-down.
C.Calculate the non-nested CLASS 1 Elapsed time (ET) minus non-nested CLASS 2 ET. If the value is
high, this can only be caused by spending most time in the application, and therefore the application
should be investigated.
D.Check to see if the DB2 remote connection can become inactive at commit (Type 2 inactive). If not, this
leads to a high non-nested CLASS 1 ET and is likely the cause of the performance problem. Inactive
connections will use less CPU than threads that stay active all the time.
Correct:A
certification IBM 000-732 examen 000-732
NO.15 An application has been running in production for a long time. The size of the objects involved
has not changed, but the application is running much slower than in the beginning. When should
the DBA consider manually REBINDing the application?
A.After REORGing the objects with inline statistics.
B.When dynamic SQL is used, but only after REORG and RUNSTATS has been performed.
C.Actually it is NOT recommended to perform manual rebinds but rather have DB2 perform automatic
rebinds.
D.If the size of the objects has not changed after gathering RUNSTATS data, the access path is very
unlikely to change, and therefore no REBIND is needed.
Correct:A
certification IBM 000-732 examen 000-732
NO.16 Which of the following is the correct configuration in a two way DB2 datasharing group?
A.MVSA (DB2A, active log A, workfile A) MVSB (DB2B, active log B, workfile B) Shared BSDS and
catalog and directory Coupling facility one Sysplex timer one
B.MVSA (DB2A, BSDS A, active log A, workfile A) MVSB (DB2B, BSDS B, active Log B, workfile B)
Shared catalog and directory Coupling facility one Sysplex timer one
C.MVSA (DB2A, BSDS A, active log A, workfile A, catalog & directory A) MVSB (DB2B, BSDS B, active
log A, workfile A, catalog & directory B) Coupling facility one Sysplex timer one
D.MVSA (DB2A, BSDS A, active log A, workfile A, catalog & directory A) MVSB (DB2B, BSDS B, active
log B, workfile B, catalog & directory B) Coupling facility one Sysplex timer one
Correct:B
certification IBM 000-732 examen 000-732
NO.17 At which of the following times is the access control authorization routine (DSNX@XAC)
invoked?
A.At DB2 startup.
B.When executing a DB2 GRANT statement.
C.When DB2 has cached authorization information.
D.During any authorization check if NO was specified in the USE PROTECTION field of the DSNTIPP
panel.
Correct:A
certification IBM 000-732 examen 000-732
NO.18 Which of the following buffer pool thresholds CANNOT be changed by the DBA?
A.Deferred write threshold (DWQT)
B.Immediate write threshold (IWTH)
C.Vertical deferred write threshold (VDWQT)
D.Virtual buffer pool assisting parallel sequential threshold (VPXPSEQT)
Correct:B
certification IBM 000-732 examen 000-732
NO.19 Which of the following DSNZPARMs is necessary to influence access path selection for certain
queries?
A.STDSQL
B.OPTHINTS
C.PARTKEYU
D.DESCSTAT
Correct:B
certification IBM 000-732 examen 000-732
NO.20 An audit trace shows that TSO user TSOID1, with DBADM authority, is continually attempting to
update a table in DB2 subsystem DSN1 that is not supposed to be updated. Which of the following
will prevent access to the DB2 subsystem?
A.REVOKE DBADM FROM TSOID1
B.Change TSOID1's access to DSNR resource class DSN1.TSO to NONE
C.Change TSOID1's access to DSNR resource class DSN1.BATCH to READ
D.Change TSOID1's access to DSNR resource class DSN1.BATCH to NONE
Correct:D
certification IBM 000-732 examen 000-732
Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de IBM 000-732 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test IBM 000-732 qui vous amenera le succès du test IBM 000-732, au lieu de traivailler avec peine et sans résultat.
没有评论:
发表评论