Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Microsoft 070-561-Csharp, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Microsoft 070-561-Csharp. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.
Participer au test Microsoft 070-561-Csharp est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Microsoft 070-561-Csharp symbole bien la professionnalité d'un travailleur dans cette industrie.
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Microsoft 070-561-Csharp avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test Microsoft 070-561-Csharp est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification Microsoft 070-561-Csharp.
Code d'Examen: 070-561-Csharp
Nom d'Examen: Microsoft (TS:MS.NET Framework 3.5,ADO.NET Application Development)
Questions et réponses: 100 Q&As
070-561-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/070-561-Csharp.html
NO.1 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a typed DataSet named DSOrders. The DSOrders DataSet has two DataTables
as shown in the following sequence: 1. Orders 2. Customers You write the following code
segment. DSOrders ds = new DSOrders(); IDataReader rd; You need to expose the two DataTables
as a DataReader stream. You also need to ensure that the Customers DataTable is the first
DataTable in the stream. Which code segment should you add?
A.rd = ds.CreateDataReader(ds.Customers);
B.rd = ds.CreateDataReader(ds.Customers, ds.Orders);
C.ds.DefaultViewManager.CreateDataView(ds.Customers);rd = ds.CreateDataReader();
D.ds.Customers.Prefix = "0";ds.Orders.Prefix = "1";rd = ds.CreateDataReader();
Answer:B
certification Microsoft certification 070-561-Csharp 070-561-Csharp 070-561-Csharp 070-561-Csharp
NO.2 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You write the following code
segment. DataTable tbl = new DataTable(); tbl.Columns.Add("Price", typeof(double)); //Other
columns added //Fill data You need to retrieve the maximum value in the Price column of the tbl
DataTable. Which code segment should you add?
A.double maxPrice = (double)tbl.Compute("Max(Price)", "");
B.double maxPrice = (double)tbl.Rows.Find("Max(Price)")["Price"];
C.double maxPrice = (double)tbl.Select("Max(Price)")[0]["Price"];
D.tbl.DefaultView.RowFilter = "Max(Price)";double maxPrice=(double) tbl.DefaultView[0]["Price"];
Answer:A
Microsoft examen 070-561-Csharp 070-561-Csharp 070-561-Csharp examen 070-561-Csharp examen
NO.3 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database. You write the following code segment.
string queryString = "Select Name, Age from dbo.Table_1"; SqlCommand command = new
SqlCommand(queryString, (SqlConnection)connection)); You need to get the value that is contained in
the first column of the first row of the result set returned by the query. Which code segment should you
use?
A.var value = command.ExecuteScalar();string requiredValue = value.ToString();
B.var value = command.ExecuteNonQuery();string requiredValue = value.ToString();
C.var value = command.ExecuteReader(CommandBehavior.SingleRow);string requiredValue =
value[0].ToString();
D.var value = command.ExecuteReader(CommandBehavior.SingleRow);string requiredValue =
value[1].ToString();
Answer:A
certification Microsoft 070-561-Csharp 070-561-Csharp 070-561-Csharp 070-561-Csharp
NO.4 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses Microsoft SQL Server 2005. You write the following code segment. (Line
numbers are included for reference only.) 01 String myConnString = "User 02 ID=;password=;Initial
03 Catalog=pubs;Data Source=myServer"; 04 SqlConnection myConnection = new 05
SqlConnection(myConnString); 06 SqlCommand myCommand = new SqlCommand(); 07 DbDataReader
myReader; 08 myCommand.CommandType = 09 CommandType.Text; 10 myCommand.Connection =
myConnection; 11 myCommand.CommandText = "Select * from Table1; Select * from Table2;"; 12 int
RecordCount = 0; 13 try 14 { 15 myConnection.Open(); 16 17 } 18 catch (Exception ex) 19 { 20 } 21 finally
22 { 23 myConnection.Close(); 24 } You need to compute the total number of records processed by the
Select queries in the RecordCount variable. Which code segment should you insert at line 16?
A.myReader = myCommand.ExecuteReader();RecordCount = myReader.RecordsAffected;
B.while (myReader.Read()){ //Write logic to process data for the first result.}RecordCount =
myReader.RecordsAffected;
C.while (myReader.HasRows){ while (myReader.Read()) { //Write logic to process data for the second
result. RecordCount = RecordCount + 1; myReader.NextResult(); }}
D.while (myReader.HasRows){ while (myReader.Read()) { //Write logic to process data for the second
result. RecordCount = RecordCount + 1; } myReader.NextResult();}
Answer:D
certification Microsoft 070-561-Csharp 070-561-Csharp 070-561-Csharp 070-561-Csharp examen 070-561-Csharp
NO.5 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You write the following code
segment. string sql = "Select InvoiceNo,OrderAmount from Orders"; SqlDataAdapter adp = new
SqlDataAdapter(sql, con); DataTable tblOrders = new DataTable(); adp.Fill(tblOrders); If the value
of the OrderAmount column is greater than 1000, then a discount of 5 percent is calculated. You
need to create a DataColumn object named Discount that contains the discount value for each row
in the tblOrders DataTable. Which code segment should you use?
A.DataColumn col = new DataColumn("Discount");col.Expression =
"IIF(OrderAmount>1000,OrderAmount*5/100,0)";tblOrders.Columns.Add(col);
B.DataColumn col = new DataColumn("Discount");col.DefaultValue =
"IIF(OrderAmount>1000,OrderAmount*5/100,0)";tblOrders.Columns.Add(col);
C.DataColumn col = new
DataColumn("Discount");tblOrders.Columns.Add(col);tblOrders.Compute("Discount=OrderAmou
nt*5/100","OrderAmount>1000");
D.DataColumn col = new DataColumn("Discount");tblOrders.Columns.Add(col);col.Expression=
tblOrders.Compute("OrderAmount*5/100","OrderAmount>1000").ToString();
Answer:A
Microsoft 070-561-Csharp examen 070-561-Csharp 070-561-Csharp examen
NO.6 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following
columns: ID OrderID ProductID Quantity LineTotal The OrderDetailTable object is populated with
data provided by a business partner. Some of the records contain a null value in the LineTotal field
and 0 in the Quantity field. You write the following code segment. (Line numbers are included for
reference only.) 01 DataColumn col = new DataColumn("UnitPrice", typeof(decimal)); 02 03
OrderDetailTable.Columns.Add(col); You need to add a DataColumn named UnitPrice to the
OrderDetailTable object. Which line of code should you insert at line 02?
A.col.Expression = "LineTotal/Quantity";
B.col.Expression = "LineTotal/ISNULL(Quantity, 1)";
C.col.Expression = "LineTotal.Value/ISNULL(Quantity.Value,1)";
D.col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)";
Answer:D
Microsoft 070-561-Csharp 070-561-Csharp
NO.7 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database. You write the following code segment.
string query = "Select EmpNo, EmpName from dbo.Table_1; select Name,Age from dbo.Table_2";
SqlCommand command = new SqlCommand(query, connection); SqlDataReader reader =
command.ExecuteReader(); You need to ensure that the application reads all the rows returned by the
code segment. Which code segment should you use?
A.while (reader.NextResult()){ Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.Read();}
B.while (reader.Read()){ Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.NextResult();}
C.while (reader.Read()){ Console.WriteLine(String.Format("{0}, {1}",reader[0],
reader[1]));}reader.NextResult();while (reader.Read()){ Console.WriteLine(String.Format("{0},
{1}",reader[0], reader[1]));}
D.while (reader.NextResult()){ Console.WriteLine(String.Format("{0}, {1}",reader[0],
reader[1]));}reader.Read();while (reader.NextResult()){ Console.WriteLine(String.Format("{0},
{1}",reader[0], reader[1]));}
Answer:C
certification Microsoft 070-561-Csharp examen 070-561-Csharp certification 070-561-Csharp certification 070-561-Csharp
NO.8 You create an application by using the Microsoft. NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You need to separate the
security-related exceptions from the other exceptions for database operations at run time. Which
code segment should you use?
A.catch (System.security.SecurityException ex) { //Handle all database security related
exceptions. }
B.catch (System.Data.Sqlclient.SqlException ex) { for (int i = 0; i < ex.Errors.Count; i++) { //Handle
all database security related exceptions. } else( //Handle other exceptions } } }
C.catch (System.Data.Sqlclient.SqlException ex) { for (int i = 0; i < ex.Errors.Count; i++) { //Handle
all database security related exceptions. } else{ //Handle other exceptions } } }
D.catch (System.Data.Sqlclient.SqlException ex) { for (int i = 0; i < ex.Errors.Count; i++) { //Handle
all database security related exceptions. } else{ //Handle other exceptions } } }
Answer:B
Microsoft 070-561-Csharp 070-561-Csharp examen 070-561-Csharp
NO.9 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a database named ContosoDB. The database resides on a server
named ContosoSrv. You generate the following files: A storage schema definition file named
Contoso.ssdl A conceptual schema definition file named Contoso.csdl A mapping schema
definition file named Contoso.msl You alter the contents of the Contoso.csdl and Contoso.msl
files. You need to generate the .NET Framework entities from the altered schema definitions.
Which command should you use?
A.Edmgen.exe /mode:EntityClassGeneration /project:Contoso /incsdl:Contoso.csdl
B.Edmgen.exe /mode:FromSsdlGeneration /project:Contoso /inssdl:Contoso.ssdl
/outcsdl:Contoso.csdl
C.Edmgen.exe /mode:ViewGeneration /project:Contoso /inssdl:Contoso.ssdl /incsdl:Contoso.csdl
/inmsl:Contoso.msl /outobjectlayer:Contoso
D.Edmgen.exe /mode:FullGeneration /project:Contoso /provider:System.Data.SqlClient
/connectionstring:"server=ContosoSrv;integrated security=true;database=ContosoDB"
Answer:A
Microsoft 070-561-Csharp examen 070-561-Csharp 070-561-Csharp examen 070-561-Csharp
NO.10 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has an untyped DataTable object named tblCustomer. The tblCustomer object
contains a DataColumn named Age. You plan to create a ColumnChanging event handler for the
tblCustomer object. You need to ensure that when the existing data is modified, any value in the
Age DataColumn that is greater than 100 is set to DBNull. Which code segment should you use?
A.void ValidateChanges(object sender, DataColumnChangeEventArgs e){ if
(e.Column.ColumnName == "Age" & e.ProposedValue!=DBNull.Value){ if ((int)e.Row["Age"] >
100){ e.Row["Age"] = DBNull.Value; } }}
B.void ValidateChanges(object sender, DataColumnChangeEventArgs e){ if
(e.Column.ColumnName == "Age" & e.ProposedValue!=DBNull.Value){ if ((int)e.ProposedValue >
100){ e.Row["Age"] = DBNull.Value; } }}
C.void ValidateChanges(object sender, DataColumnChangeEventArgs e){ if
(e.Column.ColumnName == "Age" & e.ProposedValue!=DBNull.Value) { if ((int)e.Row["Age"] >
100){ e.ProposedValue = DBNull.Value; } }}
D.void ValidateChanges(object sender, DataColumnChangeEventArgs e){if
(e.Column.ColumnName == "Age" & e.ProposedValue!=DBNull.Value) { if ((int)e.ProposedValue >
100) { e.ProposedValue = DBNull.Value; } }}
Answer:D
certification Microsoft certification 070-561-Csharp 070-561-Csharp examen 070-561-Csharp examen
NO.11 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has the following typed DataSets: A DataSet named DSCustomers with a
DataTable named Customers A DataSet named DSOrders with a DataTable named Orders You
write the following code segment. DSCustomers dsCust = new DSCustomers(); DSOrders dsOrd =
new DSOrders(); ... IDataReader rd; You need to expose the Customers DataTable and the Orders
DataTable by using a DataReader stream. Which code segment should you add?
A.rd = dsCust.CreateDataReader(dsOrd.Orders);
B.rd = dsCust.CreateDataReader(dsCust.Customers, dsOrd.Orders);
C.dsCust.Load(dsOrd.CreateDataReader(), LoadOption.Upsert, "Customers");rd =
dsCust.CreateDataReader();
D.DataTable tbl = new
DataTable();tbl.Load(dsOrd.Orders.CreateDataReader());tbl.Load(dsCust.Customers.CreateDataR
eader());rd = tbl.CreateDataReader();
Answer:B
Microsoft certification 070-561-Csharp certification 070-561-Csharp 070-561-Csharp
NO.12 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You run the application under
a Least-Privilege User Account (LUA) of the Windows operating system. You need to configure the
SQL Server 2005 connection string in the app.config file to use SQL Server Express user
instances. Which code segment should you use?
A.Data Source=\\SQLExpress;Integrated
Security=true;AttachDBFilename=|DataDirectory|\InstanceDB.mdf;Initial Catalog=InstanceDB;
B.Data Source=\\SQLExpress;Integrated Security=true;User
Instance=true;AttachDBFilename=InstanceDB.mdf;Initial Catalog=InstanceDB;
C.Data Source=\\SQLExpress;Integrated Security=true;User
Instance=true;AttachDBFilename=|DataDirectory|\InstanceDB.mdf;Initial Catalog=InstanceDB;
D.Data Source=\\SQLExpress;Integrated Security=false;User
Instance=true;AttachDBFilename=|DataDirectory|\InstanceDB.mdf;Initial Catalog=InstanceDB;
Answer:C
Microsoft examen 070-561-Csharp 070-561-Csharp 070-561-Csharp examen
NO.13 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You write the following code segment. DataTable tbl = new DataTable(); DataColumn colId =
tbl.Columns.Add( "ID", typeof(int)); colId.AutoIncrement = true; tbl.Constraints.Add("Pkey", colId,
true); DataColumn colCtry = tbl.Columns.Add( "Country", typeof(string)); colCtry.DefaultValue =
"USA"; tbl.Columns.Add("Name", typeof(string)); You need to create a new row in the tbl
DataTable that meets the following requirements: The ID column is set to an auto-incremented
value. The Country column is set to the default value. The Name column is set to the value
"Customer A". Which code segment should you use?
A.tbl.Rows.Add(0, null, "Customer A");
B.tbl.Rows.Add(null, null, "Customer A");
C.tbl.Rows.Add(null, DBNull.Value, "Customer A");
D.tbl.Rows.Add(DBNull.Value, DBNull.Value, "Customer A");
Answer:B
Microsoft 070-561-Csharp examen 070-561-Csharp examen
NO.14 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You write the following code segment. DataTable tblCustomer = new DataTable("Customer");
DataColumn parentCol= tblCustomer.Columns.Add("ID", typeof(int)); //Other columns added for
tblCustomer DataTable tblOrder = new DataTable("Order"); DataColumn
childCol=tblOrder.Columns.Add("CustomerID",typeof(int)); //Other columns added for tblOrder
DataSet ds = new DataSet(); ds.Tables.Add(tblOrder); ds.Tables.Add(tblCustomer); The
CustomerID column relates the Order DataTable to the Customer DataTable. You need to ensure
that when you delete a row in the Customer DataTable, the corresponding row in the Order
DataTable is deleted. Which code segment should you use?
A.ForeignKeyConstraint fCon = new ForeignKeyConstraint(parentCol, childCol);fCon.DeleteRule
= Rule.SetNull;tblOrder.Constraints.Add(fCon);
B.ForeignKeyConstraint fCon = new ForeignKeyConstraint(parentCol, childCol);fCon.DeleteRule
= Rule.Cascade;tblOrder.Constraints.Add(fCon);
C.ForeignKeyConstraint fCon = new ForeignKeyConstraint(parentCol, childCol);fCon.DeleteRule
= Rule.SetNull;tblCustomer.Constraints.Add(fCon);
D.ForeignKeyConstraint fCon = new ForeignKeyConstraint(parentCol, childCol);fCon.DeleteRule
= Rule.Cascade;tblCustomer.Constraints.Add(fCon);
Answer:B
Microsoft certification 070-561-Csharp 070-561-Csharp 070-561-Csharp examen certification 070-561-Csharp
NO.15 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application is used to retrieve records from a database named Sales. The database resides on a
Microsoft SQL Server 2005 server named ProdServer. The application connects to the database by using
an instance of the SqlConnection class that has the following connection string. "Data
Source=ProdServer;UID=SalesUser;PWD=Pa$$w0rd;" When the application calls the Open method of
the SqlConnection object, the following exception is thrown: "Cannot open user default database. Login
failed. Login failed for user 'SalesUser'". The default database for SalesUser is Sales. You need to ensure
that you can connect to the Sales database when the user account for the connection is SalesUser. What
should you do?
A.Create a login for SalesUser on ProdServer.
B.Create a database user object in the Sales database. Map the object to the SQL Server 2005 login of
SalesUser.
C.Modify the connection string in the following manner.
"Server=ProdServer;Database=Sales;UID=SalesUser;PWD=Pa$$w0rd;"
D.Modify the connection string in the following manner. "Data Source=ProdServer;Initial
Catalog=Sales;UID=SalesUser; PWD=Pa$$w0rd;"
Answer:B
Microsoft 070-561-Csharp 070-561-Csharp 070-561-Csharp 070-561-Csharp
NO.16 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. The application uses an XML
file that contains product data. A corresponding XSD file contains the schema of the XML file. You
need to ensure that the application performs the following tasks: Loads the XML file in a typed
DataSet Validates the XML file against the schema provided in the XSD file What should you do?
A.Use the xsd.exe tool along with the /loadxml parameter to create a typed DataSet object that
contains the data from the XML file.
B.Use the xsd.exe tool along with the /dataset parameter to generate a typed DataSet object.Use
the DataSet.ReadXml method to load the typed DataSet object.
C.Add the XSD file to the schema collections of the XmlReader object.Load the XML file in the
XmlReader object.Iterate through the XML nodes of the XMLReader object to create a new typed
DataRow for each node.
D.Load the XML file in an XmlDocument object.Call the XmlDocument.Validate method to validate
the XML file against the schema.Iterate through the XML nodes of the XmlDocument object to
create a new typed DataRow for each node.
Answer:B
certification Microsoft 070-561-Csharp examen 070-561-Csharp examen
NO.17 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses the following LINQ query. var query = from o in orderLinesQuery where
(string)o["CarrierTrackingNumber"] == "AEB6-4356-80" select new { SalesOrderID =
o.Field("SalesOrderID"), OrderDate = o.Field("OrderDate") }; The CarrierTrackingNumber field in
the DataRow is nullable. You need to ensure that an exception does not occur if the
CarrierTrackingNumber field has a null value. Which code segment should you use?
A.var query = from o in orderLinesQuerywhere !o.IsNull("CarrierTrackingNumber")
&(string)o["CarrierTrackingNumber"] == "AEB6-4356-80"select new { SalesOrderID =
o.Field("SalesOrderID"), OrderDate = o.Field("OrderDate")};
B.var query = from o in orderLinesQuerywhere o.IsNull("CarrierTrackingNumber")
&(string)o["CarrierTrackingNumber"] == "AEB6-4356-80"select new { SalesOrderID =
o.Field("SalesOrderID"), OrderDate = o.Field("OrderDate")};
C.var query = from o in orderLinesQuerywhere o.Field("CarrierTrackingNumber") ==
"AEB6-4356-80"select new { SalesOrderID = o.Field("SalesOrderID"), OrderDate =
o.Field("OrderDate")};
D.var query = from o in orderLinesQuerywhere (string)o["CarrierTrackingNumber"] ==
DbNull.Value &(string)o["CarrierTrackingNumber"] == "AEB6-4356-80"select new { SalesOrderID =
o.Field("SalesOrderID"), OrderDate = o.Field("OrderDate") };
Answer:C
Microsoft 070-561-Csharp certification 070-561-Csharp certification 070-561-Csharp 070-561-Csharp examen 070-561-Csharp
NO.18 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You write the following code segment. (Line numbers are included for reference only.) 01 private
List GetEmployers() { 02 List employers = new List(); 03 SqlCommand cmd = new SqlCommand();
04 ... 05 XmlReader reader = cmd.ExecuteXmlReader(); 06 while (reader.Read()) { 07 08 } 09 return
employers; 10 } The cmd object returns the following XML data structure. Shai Bassli Wingtip
Toys ... ... You need to populate the employers list with each employer entry in the XML data
structure. Which code segment should you insert at line 07?
A.if (reader.Name == "Emp.OrgName") { string employer = reader.ReadElementContentAsString();
employers.Add(employer);}
B.if (reader.Name == "Emp.OrgName") { reader.MoveToContent(); string employer = reader.Value;
employers.Add(employer);}
C.if (reader.Name == "Emp.OrgName" & reader.HasAttributes) { reader.MoveToFirstAttribute();
string employer = reader.Value; employers.Add(employer);}
D.if (reader.Name == "Emp.OrgName") { reader.MoveToFirstAttribute(); if (reader.HasValue)
{ string employer = reader.Value; employers.Add(employer); }}
Answer:A
Microsoft 070-561-Csharp examen 070-561-Csharp examen 070-561-Csharp 070-561-Csharp examen
NO.19 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application connects to a Microsoft SQL Server 2005 database. You write the following code
segment. (Line numbers are included for reference only.) 01 SqlConnection sqlconn 02 ... 03
SqlDataAdapter ordAdapter = 04 new SqlDataAdapter( 05 "SELECT OrderID, CustomerID,
OrderDate, Qty, UnitPrice,"+ 06 "UnitMargin FROM Sales.SalesOrderDetail", sqlconn); 07 DataSet
ord_ds = new DataSet(); 08 DataTable ord_dt = ord_ds.Tables.Add("Orders"); 09
ordAdapter.Fill(ord_dt); 10 ord_dt.Rows[0].BeginEdit(); 11 // The code here will insert, update and
delete rows to the ord_dt DataTable. 12 ord_dt.Rows[0].EndEdit(); 13 14 ord_dt.AcceptChanges();
You need to validate that every row that has the Qty column value is set to zero before you commit
any changes. Which code segment should you insert at line 13?
A.DataRow[] newRows = ord_dt.Select(null, null, DataViewRowState.CurrentRows);foreach
(DataRow newrow in newRows){ if(newrow.Field("Qty",DataRowVersion.Current) == 0) ...}
B.DataRow[] newRows = ord_dt.Select(null, null, DataViewRowState.CurrentRows);foreach
(DataRow newrow in newRows){ if(newrow.Field("Qty",DataRowVersion.Original) == 0) ...}
C.DataRow[] newRows = ord_dt.Select(null, null, DataViewRowState.ModifiedCurrent);foreach
(DataRow newrow in newRows){ if(newrow.Field("Qty",DataRowVersion.Current) == 0) ...}
D.DataRow[] newRows = ord_dt.Select(null, null, DataViewRowState. ModifiedCurrent);foreach
(DataRow newrow in newRows){ if(newrow.Field("Qty",DataRowVersion.Original) == 0) ...}
Answer:A
certification Microsoft 070-561-Csharp 070-561-Csharp examen
NO.20 You create an application by using Microsoft .NET Framework 3.5. You use Microsoft ADO.NET
Entity Framework for persistence. You write a conceptual schema definition for the entity data
model in the following manner. You need to retrieve all the InvoiceNo property values for the
Customer entity instance that has the CustomerID property value as 1. Which entity SQL query
should you use?
A.SELECT o.InvoiceNo FROM ContosoEntities.Order as o,ContosoEntities.Customer as c WHERE
c.CustomerID=1
B.SELECT o.InvoiceNo FROM ContosoEntities.Order as o, ROW(o.Customer) as c WHERE
c.CustomerID=1
C.SELECT o.InvoiceNo FROM ContosoEntities.Order as o WHERE (Select REF(c) from
ContosoEntities.Customer as c WHERE CustomerID=1)
D.SELECT o.InvoiceNo FROM ContosoEntities.Order as o, o.Customer as c WHERE
c.CustomerID=1
Answer:D
Microsoft examen 070-561-Csharp 070-561-Csharp 070-561-Csharp examen
Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Microsoft 070-561-Csharp est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Microsoft 070-561-Csharp lancée par l'équipe de Pass4Test sont bien populaire par les candidats.
没有评论:
发表评论