Le dernier examen XML Master I10-002 gratuit Télécharger

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Le test Certificat XML Master I10-002 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification XML Master I10-002. Vous allez prendre toutes essences du test XML Master I10-002 dans une courte terme.

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

Choisir le Pass4Test vous permet non seulement à réussir le test XML Master I10-002, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A XML Master I10-002 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel XML Master I10-002 peut vous assurer à réussir 100% le test XML Master I10-002. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Choisir le Pass4Test peut vous aider à réussir 100% le test XML Master I10-002 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Code d'Examen: I10-002
Nom d'Examen: XML Master (XML Master: Professional V2)
Questions et réponses: 80 Q&As

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

I10-002 Démo gratuit à télécharger: http://www.pass4test.fr/I10-002.html

NO.1 Push the Exhibit Button to load the referenced "XML Document".
Assume that the character "3" is obtained from the "XML document". Select which XSLT style sheet
correctly performs the transformation. (Multiple answers possible. Select two.)
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[x='1'][y='2'] " />
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[(attribute::x='1') and (text()='3')] " />
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[self='3'] " />
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[self::*='3'] " />
</xsl:template>
</xsl:stylesheet>
Answer: BD

XML Master examen   I10-002 examen   certification I10-002   I10-002 examen   I10-002 examen

NO.2 Push the Exhibit Button to load the referenced "XML document".
[XML Document]
<root><data>lmnop</data></root>
Assume that the "XML Document" is changed to the "Results XML Document." Select which XSLT style
sheet correctly performs the transformation.
Note that the XSLT processor can output transformation results as a document.
[Results XML Document]
<ZZZ><YYY>lmnop</YYY></ZZZ>
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:include href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " //root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:import href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " //root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:include href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:import href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
Answer: A

XML Master examen   I10-002   I10-002 examen   certification I10-002

NO.3 Push the Exhibit Button to load the referenced "XML Document".
Select which of the following correctly describes the output results of an XSLT transformation of the "XML
Document" using the "XSLT Style Sheet".
Note that the XSLT processor can output transformation results as a document. Line feeds and indents
are not reflected.
A. <record>
<data>100</data>
</record>
B. <record xmlns="urn:xmlmaster:test">
<data>100</data>
</record>
C. <record xmlns="urn:xmlmaster:test">
<data xmlns= "" >100</data>
</record>
D. <record>
<data>100</data>
<data>70</data>
</record>
E. <record xmlns="urn:xmlmaster:test">
<data>100</data>
<data>70</data>
</record>
F. <record xmlns="urn:xmlmaster:test">
<data xmlns= "" >100</data>
<data xmlns= "" >70</data>
</record>
Answer: F

XML Master examen   I10-002 examen   certification I10-002   certification I10-002   I10-002 examen

NO.4 Which of the following describes the most correct call order of the ContentHandler interface methods
when parsing the following "XML Document" using a non-validating SAX parser? This question reflects
line feeds within the XML document.
[XML Document]
<a>
<b>
c
</b>
</a>
A. startDocument - startElement - characters - startElement - characters - characters - characters -
endElement - characters - endElement - endDocument
B. startDocument - startElement - ignorableWhitespace - startElement - ignorableWhitespace -
characters - ignorableWhitespace - endElement - ignorableWhitespace - endElement - endDocument
C. startDocument - startElement - startElement - characters - endElement - endElement - endDocument
D. startDocument - startElement - startElement - characters - characters - endElement - endElement -
endDocumentW
Answer: A

certification XML Master   I10-002   I10-002   I10-002

NO.5 Select which of the following correctly describes WSDL. (WSDL 1.1)
A. WSDL assumes SOAP as the message transmission form
B. When WSDL is defined by a combination of style="rpc" and use="encoded", then
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" must be designated
C. When WSDL is defined by a combination of style="rpc" and use="encoded", then the encodingStyle
attribute cannot be designated
D. WSDL may be defined by a combination of style="rpc" and use="literal"
Answer: D

XML Master   I10-002 examen   I10-002   I10-002 examen

NO.6 Push the Exhibit Button to load the referenced "XML Document 1" and "XML Document 2," and process
XML using "DOM Processing."
Select which of the following is the most appropriate expression of the results under XML 1.0. Line feeds
and/or indents are not reflected in the results.
A. <root2 xmlns="urn:xmlmaster:EX2">
<data xmlns= " urn:xmlmaster:EX1 " >string value</data>
</root2>
B. <root2 xmlns="urn:xmlmaster:EX2">
<data>string value</data>
</root2>
C. <root2 xmlns="urn:xmlmaster:EX2">
<data xmlns= " urn:xmlmaster:EX1 " />
</root2>
D. <root2 xmlns="urn:xmlmaster:EX2">
<data/>
</root2>
Answer: A

XML Master   I10-002 examen   I10-002 examen

NO.7 Push the Exhibit Button to load the referenced "XML Document".
[XML Document]
<root><data>lmnop</data></root>
Assume that the "XML document" is changed to the "Results XML Document." Select which XSLT style
sheet correctly performs the transformation.
Note that the XSLT processor can output transformation results as a document.
[Results XML Document]
<lmnop/>
Or
<lmnop></lmnop>
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="<xsl:value-of select='.'/>"/>
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="{ . }"/>
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="."/>
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:text disable-output-escaping="no"><</xsl:text>
<xsl:value-of select="."/>
<xsl:text disable-output-escaping="no">/></xsl:text>
</xsl:template>
</xsl:stylesheet>
Answer: B

certification XML Master   certification I10-002   I10-002

NO.8 What must you write in XSLT style sheet (1) to process the following "XML Document" and obtain the
following "transform results"? Select the correct answer below. Note that "#" indicates a line feed, and "=*"
indicates a tab.
Assume that the XSLT processor can output transformation results as a document.
A. Nothing needs to be written.
B. <xml:space="preserve"/>
C. <xsl:preserve-space elements="content"/>
D. <xsl:strip-space elements="doc body"/>
Answer: D

XML Master examen   I10-002   I10-002 examen   I10-002   I10-002

NO.9 Push the Exhibit Button to load the referenced "XML Document".
[XML Document]
<TestML xmlns="urn:xmlmaster:testml">
<record level="1" data="100" />
<record level="2" data="250" />
</TestML>
Choose the XML Schema Document that does not correctly define the structure of the "XML Document".
A. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns:tns="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" tns:testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" tns:record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" tns:recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
B. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
C. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
D. <schema
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns:tns="urn:xmlmaster:testml">
<element name="TestML" type="tns:testmlType" />
<complexType name="testmlType">
<sequence>
<element ref="tns:record" maxOccurs="unbounded" />
</sequence>
</complexType>
<element name="record" type="tns:recordType" />
<complexType name="recordType">
<attribute name="level" type="int" />
<attribute name="data" type="int" />
</complexType>
</schema>
Answer: C

certification XML Master   I10-002 examen   I10-002   I10-002   certification I10-002

NO.10 Which of the following correctly describes the DOM (Level 2) Node interface?
A. The Node interface can be used to change the value (nodeValue) of the DOM element node (Element)
B. The Node interface can be used to change the name (nodeName) of the DOM element node (Element)
C. The Node interface can be used to change the value (nodeValue) of the DOM attribute node (Attr)
D. The Node interface can be used to change the name (nodeName) of the DOM attribute node (Attr)
Answer: C

XML Master examen   certification I10-002   I10-002   certification I10-002   I10-002

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat XML Master I10-002 est bien autorisé. Avec le certificat XML Master I10-002, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A XML Master I10-002.