Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test CheckPoint 156-510 à se preuver. Mais le taux du succès et bien bas. Participer le test CheckPoint 156-510 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Choisir le Pass4Test peut vous aider à réussir 100% le test CheckPoint 156-510 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test CheckPoint 156-510 sans aucune doute si vous choisissez le Pass4Test.
Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 156-510 est lequel très important dans les tests de Certification CheckPoint. Pour être qualifié de CheckPoint, on doit obtenir le passport de test CheckPoint 156-510.
Votre vie changera beaucoup après d'obtenir le Certificat de CheckPoint 156-510. Tout va améliorer, la vie, le boulot, etc. Après tout, CheckPoint 156-510 est un test très important dans la série de test Certification CheckPoint. Mais c'est pas facile à réussir le test CheckPoint 156-510.
Code d'Examen: 156-510
Nom d'Examen: CheckPoint (VPN-1/FireWall-1 Management III)
Questions et réponses: 165 Q&As
156-510 Démo gratuit à télécharger: http://www.pass4test.fr/156-510.html
NO.1 When installing FW-1 on a Windows NT platform, what state should IP forwarding be in
for correct FW-1 operation?
A. Enabled
B. Disabled
Answer: A
CheckPoint examen certification 156-510 156-510 156-510
NO.2 Addresses allocated from an IP pool remain allocated for a configurable period, even after
all connections to that address are closed. What is the default time before the address is
returned to the pool?
A. 120 mins
B. 180mins
C. 30 mins
D. 60 mins
Answer: D
certification CheckPoint 156-510 156-510 examen 156-510 156-510
NO.3 Which two types of overlapping encryption domains are supported by FW-1?
A. Partial overlap
B. Full overlap
C. Proper subset
D. Partial subset
Answer: B, C
CheckPoint certification 156-510 certification 156-510 certification 156-510
NO.4 In a resilient MEP topology, what mechanism can be used by SecuRemote to determine
that the primary gateway is still available?
A. TCP Ping
B. TCP keepalives
C. RDP status queries
D. UDP ping
Answer: C
certification CheckPoint 156-510 156-510 156-510 certification 156-510 156-510
NO.5 What is true about detecting "blocked connection port scanning"?
A. It requires less memory than general port scanning
B. It is less secure than general port scanning
C. It is more secure than general port scanning
D. It requires more memory than general port scanning
Answer: A, B
certification CheckPoint 156-510 examen certification 156-510 156-510
NO.6 When making changes to users in an LDAP server using the policy editor
usermanager, when will the changes take effect?
A. After the user database is downloaded
B. When you log out of policy editor
C. After a policy download
D. When cache times out
Answer: A, C, D
CheckPoint 156-510 156-510 156-510
NO.7 How often will SecuRemote check for the availability of a VPN gateway by default?
A. 60 secs
B. 120 secs
C. 30 secs
D. 90 secs
Answer: A
CheckPoint examen certification 156-510 156-510 certification 156-510 certification 156-510
NO.8 If CPMAD terminates, how can you restart it?
A. By using the GUI log client
B. It automatically starts itself
C. By using fw cpmadstart
D. By using fwstop/fwstart
Answer: D
certification CheckPoint 156-510 156-510 certification 156-510 156-510
NO.9 Which are two network related conditions required by high availability in SEP VPN's?
A. The gateways must be synchronized
B. Traffic must be redirected correctly to the backup gateway when the primary gateway fails
C. The gateways must use identical MAC addresses
D. NTP (network time protocol) must be configured between both gateways
Answer: A, B
certification CheckPoint 156-510 156-510
NO.10 When using IP pools for MEP VPN access, where would you specify the pool to be used for
a particular gateway?
A. The NAT screen of the gateway's properties configuration
B. The ADVANCED screen of the gateway's properties configuration
C. The VPN screen of the gateway's properties screen
D. The TOPOLOGY screen of the gateway's properties configuration
Answer: A
CheckPoint certification 156-510 156-510 156-510 examen
NO.11 What is true when using SEP high availability encryption topologies?
A. Gateways must use the same FW-1 build level
B. All of these
C. You must use a distributed installation of VPN-1/FW-1
D. Gateways must use the same platform and OS
E. Gateways must run identical policies
Answer: B
CheckPoint 156-510 examen certification 156-510 certification 156-510 156-510 examen
NO.12 What does LDAP stand for?
A. Link level Direct Access Process
B. Layered Directory Administration Protocol
C. Layer Dependent Administration process
D. Lightweight Directory Access Protocol
Answer: D
CheckPoint certification 156-510 certification 156-510 156-510
NO.13 By default a Windows NT platform enables both TCP/IP and IPX. What does FW-1 do
with any IPX traffic?
A. Logs it, then drops it
B. Allows it through without being inspected
C. Drops all traffic regardless
D. Inspects the traffic and decide whether to allow it through
Answer: B
CheckPoint 156-510 156-510 examen 156-510 156-510
NO.14 You can tell if CPMAD is enabled because you see the message
"FireWall-1: Starting cpmad (Malicious Activity Detection)"
whenyou perform a fwstart. True of false?
A. False
B. True
Answer: A
certification CheckPoint 156-510 examen 156-510 156-510
NO.15 What is a land attack?
A. It causes incomplete TCP connections
B. It involves gaining access by imitating an authorized IP address
C. It involves scanning for ports on an IP address that will allow access
D. It causes a server to send packets to itself
Answer: D
CheckPoint 156-510 156-510
NO.16 How much memory is reserved for the VPN-1/FW-1 kernel on a Nokia platform?
A. 5 MB
B. 15 MB
C. 3 MB
D. 10 MB
Answer: A
CheckPoint 156-510 examen 156-510 156-510 examen certification 156-510 certification 156-510
NO.17 In a load sharing MEP environment accessed by secuRemote.What is true about gateway
selection?
A. SecuRemote will choose the gateway closest to the server
B. SecuRemote will use the first gateway to respond
C. SecuRemote will chose the gateway randomly
D. SecuRemote will prefer its primary gateway if both respond
Answer: C
CheckPoint 156-510 examen 156-510
NO.18 What is the maximum limit to the number of secondary management modules allowed?
A. No limit
B. 4
C. 2
D. 1
E. 8
Answer: A
CheckPoint 156-510 examen 156-510 156-510
NO.19 CPMAD will try to connect to the LEA server a number of times before giving up. What
are the default values for the number of connection attempts and the time interval between
them?
A. 20 times with 30secs between attempts
B. 10 times with 60secs between attempts
C. 5 times with 60secs between attempts
D. 10 times with 10secs between attempts
Answer: B
CheckPoint 156-510 156-510 156-510
NO.20 Which of the following should be disabled in a Windows NT platform when installing
FW-1?
A. WINS
B. RPC
C. NetBIOS
D. All of them
E. DHCP relay
Answer: D
CheckPoint examen certification 156-510 156-510 156-510
Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification CheckPoint 156-510, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test CheckPoint 156-510.
没有评论:
发表评论